Rotary Engine Building, Porting & Swaps All you could ever want to know about rebuilding and porting your rotary engine! Discussions also on Water, Alcohol, Etc. Injection

Injector Diffusers Question?

Thread Tools
 
Search this Thread
 
Old 05-08-2004, 12:15 AM
  #1  
Member
Thread Starter
 
t210thanniv's Avatar
 
Join Date: Oct 2003
Posts: 43
Default

My question is do I need to use the Inj diffusers? Has anyone taken them out, and ran the inj without them? Reason i ask is because the injectors I have dont really sit on the diffusers the way they should. They dont seem to be the correct ones, as far as how it fits onto the diffuser. I bough the car like this with these injectors. When i was taking the motor apart, all the inj seals were ripped or pinched, and i'd rather not put it back with this current setup.
t210thanniv is offline  
Old 05-08-2004, 01:56 AM
  #2  
Senior Member
 
GMON's Avatar
 
Join Date: Dec 2003
Location: Minneapolis,MN
Posts: 500
Default

They will sit funny if you dont get the duffusers in right. I say use them. Its really pretty simple to get it right. You can buy o rings at the hardware store.



Gregory
GMON is offline  
Old 05-08-2004, 09:23 AM
  #3  
Senior Member
 
mazdadrifter's Avatar
 
Join Date: Mar 2003
Location: Sunny South Florida :)
Posts: 1,963
Default

yeah I'd use them if possible, they aren't cheap to replace and once they've heated up a couple hundred times they get VERY brittle so treat them delicatley.
mazdadrifter is offline  
Old 05-08-2004, 10:55 AM
  #4  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

Originally Posted by GMON' date='May 7 2004, 10:56 PM
They will sit funny if you dont get the duffusers in right. I say use them. Its really pretty simple to get it right. You can buy o rings at the hardware store.



Gregory
he doesnt have the stock injectors.



i would do whatever you can to keep them at least on the primary
j9fd3s is offline  
Old 05-09-2004, 06:48 AM
  #5  
Member
 
c00lduke's Avatar
 
Join Date: Jan 2002
Location: MIssion
Posts: 84
Default

I heard idle is effected if they are not on the primary but many many people dont use them on the 2nds.
c00lduke is offline  
Old 05-11-2004, 12:46 AM
  #6  
Junior Member
 
silverrotor's Avatar
 
Join Date: Feb 2003
Location: Toronto Corporate, Canada
Posts: 28
Default

Going strictly with what I read - I remember RotaryResurrection has said he doesn't feel a difference with them OFF (I think for the Secondaries). Than again, I've heard of crappy Idle w/o them. My preference? Replace the hardened O-Rings and slip the Air Diffuser In place and be done with It.
silverrotor is offline  
Old 05-11-2004, 01:16 AM
  #7  
Senior Member
 
White_FC's Avatar
 
Join Date: Oct 2003
Posts: 177
Default

I don't run injector diffusers in my car anymore, no noticable idle deficiencies because of them gone.

They were very brittle and crumbled in my hand.

Glad it happened while I had the engine tore appart and rebuilding it.
White_FC is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mr. Midas
Rotary Engine Building, Porting & Swaps
3
12-16-2005 10:50 PM
t210thanniv
Insert BS here
1
05-08-2004 03:35 PM
1Revvin7
Rotary Engine Building, Porting & Swaps
7
05-03-2004 06:17 PM
88IntegraLS
Rotary Engine Building, Porting & Swaps
16
09-09-2003 10:50 PM
ChainSawOnSteroids
2nd Generation Specific
10
12-08-2002 03:14 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Injector Diffusers Question?



All times are GMT -5. The time now is 10:54 AM.