how why where
Thread Starter
Member
Joined: Feb 2006
Posts: 38
ive heard of people p porting there own howsings before i want to know how,
i heard they did it with a lathe or a mill i have acess to these,
but even if i cut the hole could i get the sleeve to fit in.
then if you get the sleeve in how do you gring it flush.
and repleys apreciated.
i heard they did it with a lathe or a mill i have acess to these,
but even if i cut the hole could i get the sleeve to fit in.
then if you get the sleeve in how do you gring it flush.
and repleys apreciated.
Senior Member
Joined: Oct 2003
Posts: 352
Fabricator
Joined: Jan 2004
Posts: 1,322
From: Central Ohio (Hebron) Zephyrhills Fla.
Originally Posted by madaz matt' post='801653' date='Feb 13 2006, 10:17 PM
ive heard of people p porting there own howsings before i want to know how,
i heard they did it with a lathe or a mill i have acess to these,
but even if i cut the hole could i get the sleeve to fit in.
then if you get the sleeve in how do you gring it flush.
and repleys apreciated.
Look at Paul Yaw,s web page www.yawpower.com
he did a real nice Pport start to finish. Lots of pictures.
Lynn E. Hanover
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
