Rotary Engine Building, Porting & Swaps All you could ever want to know about rebuilding and porting your rotary engine! Discussions also on Water, Alcohol, Etc. Injection

Blow Out At 90k...

Thread Tools
 
Search this Thread
 
Old 08-29-2003, 12:41 PM
  #11  
Senior Member
Thread Starter
 
epion2985's Avatar
 
Join Date: Jul 2003
Location: in my pants
Posts: 227
Default

he was pumping 94. Thats pretty good. He said when he took it to the track it didnt have any problems. xcept it detonated one every so long. I mean it wasnt normal or a common occurance but I understand that if it detonates even once it means you have a problem.
epion2985 is offline  
Old 08-29-2003, 01:13 PM
  #12  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

Originally Posted by epion2985' date='Aug 29 2003, 09:41 AM
he was pumping 94. Thats pretty good. He said when he took it to the track it didnt have any problems. xcept it detonated one every so long. I mean it wasnt normal or a common occurance but I understand that if it detonates even once it means you have a problem.
well if you can hear it detonating, its possible its doing it a lot more than just that once



mike
j9fd3s is offline  
Old 08-30-2003, 02:46 AM
  #13  
Senior Member
 
andynogo's Avatar
 
Join Date: Jan 2003
Location: Perth, Western Australia
Posts: 267
Default

Yeah, but I think the over-riding issue here is that 90K miles on a motor that is used hard either on the street or strip is good!



About the only way these motors last is to keep the revs down below 7000 as above that on a standard motor and the seals wear grooves in the housings, the seals wear down quicker too. Also keep boost down to less than 15psi...(even on 94 gas )



What condition were the seals in when the motor was pulled down? Are they worn worn out?
andynogo is offline  
Old 08-30-2003, 03:13 PM
  #14  
Senior Member
 
kahren's Avatar
 
Join Date: Jan 2002
Location: CT
Posts: 1,345
Default

if u can hear a turbo rotary detonate then its too much detonating

check timing? sotkc computer like others said? stock intercooler?
kahren is offline  
Old 09-02-2003, 02:18 PM
  #15  
Senior Member
Thread Starter
 
epion2985's Avatar
 
Join Date: Jul 2003
Location: in my pants
Posts: 227
Default

About the only way these motors last is to keep the revs down below 7000 as above that on a standard motor and the seals wear grooves in the housings, the seals wear down quicker too. Also keep boost down to less than 15psi...(even on 94 gas )


ceramic seals wouldnt wear grooves right.
epion2985 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
z32power.com
RX-7 & RX-8 Parts For Sale & Wanted
0
03-27-2007 06:55 AM
damimfast
RX-7 & RX-8 For Sale
0
08-05-2005 06:49 PM
damimfast
RX-7 & RX-8 For Sale
0
06-17-2005 12:32 PM
rx-7addict
RX-7 & RX-8 Parts For Sale & Wanted
2
06-14-2004 09:19 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Blow Out At 90k...



All times are GMT -5. The time now is 03:23 AM.