4 Rotor Build in Sweden
#45
I don't think so, will try it out before I deside what to do with the blueprints.
Yes, I will fabricate the bolt self. Havn't got any more info about that at the moment though...
Thanks all!
#48
#49
Don't stock rotors have internal passageways for oil to pull heat from the combustion face? Or am I wrong? If they do, how would you make that in a CNC/mill application (since I'm pretty sure stock rotors are cast)? Or are you planning to cut down a stock rotor like other builders do?
#50
The design showing is planed to come with three pieces. One skeleton, and two plates. But we are just drawing for fun right now. I have other things to come first
Tonight I have made me and fixture to help me with the 3 holes in each lobe on the main e-shaft.
This does so I don't need to pre-drill with big tool-holders as result.
Now I just "continue" drilling i these holes into the shaft. The 35mm will help me to steer to the right position.
Tonight I have made me and fixture to help me with the 3 holes in each lobe on the main e-shaft.
This does so I don't need to pre-drill with big tool-holders as result.
Now I just "continue" drilling i these holes into the shaft. The 35mm will help me to steer to the right position.