|
Hi, where unsure if I should post a project thread, but friends pushed me https://www.nopistons.com/forums/pub...IR#>/smile.gif
I'm trying to build a car the way I want. The car is an Volvo 142 -73. They are rather common i Sweden, but all of them are piston-engineed. It started with a simple 4-link-build. But now it all has got out of hands... I will post as much pictures as possible, but there is alot old pictures so I also link my older swedish project-thread so you all can se my progress-pictures. I let the pictures talk for them self at first. Visit my album at Photobucket, to much to upload! All work is done by myself. Right now I'm all hands with the 4rotor-build from my own CADs and handwork. Everything is made in house. http://s815.photobucket.com/albums/z...20Wolvo%20142/ Have problem to post images?! How many pictures can I have in every post?? A teaser... http://i815.photobucket.com/albums/z...stllning-3.jpg Best Regards Tegheim - Mooseville Performance |
you can post as many images as you want.
Awesome project man, looks like it's going to amazing! |
6 Attachment(s)
Had problems yesterday with posting pictures in the first message. The warning "too many pics...." came up al the time...
So, about the project. This is old pictures. Started on this build in the spring 2010. Have had a little summer-break, and are back on track. But will put up som older pictures first, so you all ca follow it in the right way https://www.nopistons.com/forums/pub...IR#>/smile.gif More 4rotor build... https://i815.photobucket.com/albums/...3-25001-30.jpg Attachment 16761 Attachment 16762 Attachment 16763 Attachment 16764 Attachment 16765 Attachment 16766 |
10 Attachment(s)
Some more, these pictures are taken march 2010.
Attachment 16751 Attachment 16752 Attachment 16753 Attachment 16754 Attachment 16755 Attachment 16756 Attachment 16757 Attachment 16758 Attachment 16759 A little bonus. I'm doing a little air-cooled 10cc rc-engine when I have time over... And that's not often I'm afraid... Attachment 16760 Regards |
2 Attachment(s)
This is how it could look when I'm measure an 20B-shaft https://www.nopistons.com/forums/pub...IR#>/smile.gif
https://i815.photobucket.com/albums/...4-05001-30.jpg Have only rough-turned the both sides to 46mm, will drill the oil-chanel and so on before I do the fine-cut. Attachment 16749 Attachment 16750 |
9 Attachment(s)
Sorry for the fast rewind https://www.nopistons.com/forums/pub...#>/biggrin.gif
Have started on the two loose ends. And as I did with the main-shaft, I spared a few bucks taking a smaller material, but then I have to turn the centre from an excenter from start. But why not https://www.nopistons.com/forums/pub...IR#>/smile.gif All you can save in money you can have more fun fore https://www.nopistons.com/forums/pub...IR#>/smile.gif https://i815.photobucket.com/albums/...4-10001-30.jpg Attachment 16740 Attachment 16741 Attachment 16742 Attachment 16743 Attachment 16744 Attachment 16745 Attachment 16746 Attachment 16747 Attachment 16748 |
3 Attachment(s)
Attachment 16737
Attachment 16738 Attachment 16739 The entire family is together https://www.nopistons.com/forums/pub...IR#>/smile.gif https://i815.photobucket.com/albums/...4-11011-30.jpg Hope you like it! https://www.nopistons.com/forums/pub...1047683473.gif |
5 Attachment(s)
Have started on the big end's inside of the lose lobs. Sorry for my bad english, don't know realy what the name's are for things https://www.nopistons.com/forums/pub...IR#>/smile.gif But you'll understand by the pictures I hope https://www.nopistons.com/forums/pub...#>/biggrin.gif
As you can see they are about 10mm to long, just to keep the key-grip. With the keygrip I know where to put the holes and so on, without indicate on the lobe. https://i815.photobucket.com/albums/...4-16001-30.jpg Attachment 16732 The two brothers wanted to pose beside their father https://www.nopistons.com/forums/pub...#>/biggrin.gif https://i815.photobucket.com/albums/...4-16005-30.jpg Attachment 16733 Attachment 16734 Tegheim 4Rotor vs. Mazda 20B Attachment 16735 Attachment 16736 |
7 Attachment(s)
Deep-drilling...
Attachment 16725 Usual drilling... Attachment 16726 Attachment 16727 Attachment 16728 Attachment 16729 Starting on the balance-holes... Attachment 16730 Finally the holes are done! 2pc of 12mm holes, and 1 M18x1.5 Attachment 16731 |
5 Attachment(s)
Only M24x1.5 in the front, and splines for the counterweight in the back, then ready for grinding!
Attachment 16720 Attachment 16721 Attachment 16722 Attachment 16723 Attachment 16724 |
| All times are GMT -5. The time now is 03:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands