4 Rotor Build in Sweden
03-03-2012, 11:24 AM
#171
Senior Member
Thread Starter
Join Date: Sep 2003
Posts: 229
Re: 4 Rotor Build in Sweden
When the inspiration is blown away, I play...
OMG, when I see the project like this, I realise that I havn't done anything!
The new kickup is getting toghether. If they gonna be wrong, they gonna be same wrong!
OMG, when I see the project like this, I realise that I havn't done anything!
The new kickup is getting toghether. If they gonna be wrong, they gonna be same wrong!
06-16-2012, 01:35 AM
#177
Senior Member
Thread Starter
Join Date: Sep 2003
Posts: 229
Re: 4 Rotor Build in Sweden
Got some inspiration yesterday and stayed at work for a little update
Half way there
Tada!
I went well, but I had some luck! There will be tight between the rims and caliper.
But, if you remember, I can't move the brakedisc futher in.
This is two old pics of the disc and chassi
And here is the result. Very small, but fun update
Half way there
Tada!
I went well, but I had some luck! There will be tight between the rims and caliper.
But, if you remember, I can't move the brakedisc futher in.
This is two old pics of the disc and chassi
And here is the result. Very small, but fun update
06-21-2012, 09:36 AM
#179
Senior Member
Thread Starter
Join Date: Sep 2003
Posts: 229
Re: 4 Rotor Build in Sweden
Finished the lower brackets for the Coilovers.
Have changed my Cad a little. Moved the bracket 50mm to the center of the car, to gain 61.5° angle on the coil at rideheight, and 66.0° angle at full bump.
This is what it looked lite before the change.
Have changed my Cad a little. Moved the bracket 50mm to the center of the car, to gain 61.5° angle on the coil at rideheight, and 66.0° angle at full bump.
This is what it looked lite before the change.
