Rotary Engine Building, Porting & Swaps All you could ever want to know about rebuilding and porting your rotary engine! Discussions also on Water, Alcohol, Etc. Injection

12a Horsepower

Old Aug 6, 2003 | 08:52 PM
  #1  
Eric Happy Meal's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2003
Posts: 983
From: redondo beach
Default

how much hp could i get out of an NA 12A (not sure if they were turboed) and how long would i be looking at it lasting?
Old Aug 6, 2003 | 09:44 PM
  #2  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

with a street port and the right carb (48ida) it should do about 180rwhp and run forever (100k+) provided you built it out of good parts (new rotor housings)



mike
Old Aug 7, 2003 | 12:28 AM
  #3  
Eric Happy Meal's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2003
Posts: 983
From: redondo beach
Default

would a bridge port affect the horsepower and reliability alot?



(im emissions free with the plan )
Old Aug 7, 2003 | 07:48 AM
  #4  
WishIhadaRX7's Avatar
Senior Member
 
Joined: Jun 2003
Posts: 736
From: Toledo, OH
Default

horsepower would go up, reliability would go down



a lot
Old Aug 7, 2003 | 11:23 AM
  #5  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

Originally Posted by Eric Happy Meal' date='Aug 6 2003, 09:28 PM
would a bridge port affect the horsepower and reliability alot?



(im emissions free with the plan )
it used to be with a bp you had to run the carbon seals limiting the life of the motor to between 20-60k miles* now we have steel seals that no only seal better but should last longer too.



mike



* its hard to say, a lot of bp's are race motors, which get torn down every race/season, the rest are street motors which probably are not daily cars



mike
Old Aug 7, 2003 | 01:55 PM
  #6  
Eric Happy Meal's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2003
Posts: 983
From: redondo beach
Default

crap.



ok say after the engine blows how much of it will i be in need of replacing? and about how long would it take me to rebuild it?
Old Aug 7, 2003 | 03:51 PM
  #7  
j9fd3s's Avatar
Senior Member
 
Joined: May 2002
Posts: 22,465
From: California
Default

Originally Posted by Eric Happy Meal' date='Aug 7 2003, 10:55 AM
crap.



ok say after the engine blows how much of it will i be in need of replacing? and about how long would it take me to rebuild it?
that depends on what breaks.

if you have a carbon seal motor, and it breaks an apex seal they are too soft to do damage to anything else, so you jsut rip it open and replace the seals.

if you have a steel seal motor, usually the shrapnel will take out the rotor housing and or rotor.

also in a high revving motor you can spin bearings and break stationary gears, and that can take out rotors and housings too



mike
Old Aug 7, 2003 | 04:31 PM
  #8  
WishIhadaRX7's Avatar
Senior Member
 
Joined: Jun 2003
Posts: 736
From: Toledo, OH
Default

Time? A couple days if you know what you are doing.
Old Aug 7, 2003 | 06:31 PM
  #9  
Eric Happy Meal's Avatar
Thread Starter
Senior Member
 
Joined: Jan 2003
Posts: 983
From: redondo beach
Default

Originally Posted by j9fd3s' date='Aug 7 2003, 12:51 PM
[quote name='Eric Happy Meal' date='Aug 7 2003, 10:55 AM'] crap.



ok say after the engine blows how much of it will i be in need of replacing? and about how long would it take me to rebuild it?
that depends on what breaks.

if you have a carbon seal motor, and it breaks an apex seal they are too soft to do damage to anything else, so you jsut rip it open and replace the seals.

if you have a steel seal motor, usually the shrapnel will take out the rotor housing and or rotor.

also in a high revving motor you can spin bearings and break stationary gears, and that can take out rotors and housings too



mike [/quote]

so basically, the only thing that ill have to worry about breaking is the seals, and i should be sure to replace the bearings and stationary gears about how often? and when you say itl last 20-60K miles, is that before one of the afore mentiond things happens??
Old Aug 7, 2003 | 06:38 PM
  #10  
dr0x's Avatar
Member
 
Joined: Oct 2002
Posts: 54
Default

How much a BP affects engine life all depends directly on the porter.

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:20 PM.