Judge Ito's porting school thread
08-31-2006, 06:21 PM
#52
Senior Member
Join Date: Dec 2002
Location: Bayou-self Louisiana
Posts: 947
Originally Posted by Latin270' post='835124' date='Aug 31 2006, 07:53 AM
Thanks bro, yea I got a 48 dco and am in the process of porting my irons but I am going by site and not going to use any templates. Just following the lines on the plates and working with that. Thanks.
09-01-2006, 06:11 AM
#53
Senior Member
Thread Starter
Join Date: Jan 2002
Location: NJ USA
Posts: 1,915
with the WILD streetport I highly suggest the hurley engineering duplex sideseals are used. I've had 2 engines loose oem sideseals, with the WILDstreetport. Even after carefull attention being payed to the closing edge of the port. Hurley Enginerring sideseals are made of a seriously tough material. go to their site and read up on them. in my opinion, not worth the gamble when running a WILD streetport, on oem sideseals.
09-26-2006, 08:14 PM
#55
Senior Member
Join Date: Aug 2002
Location: O.C. - CA.
Posts: 840
Ito 
Could you please explain the difference between your agressive street port compared to a extended race port with a 1/2 bridge?
Noise is not a problem with my Buddy Club exhaust. Although, smog is a concern though. I would love the brapidy-brap-brap and high rpm's but streetability is a must. I gotta have the zoom-zoom smile from a crotch rocket thrill ride as apposed to a bucking bronco can't tame my horse headache. I currently have A-Spec's 500R @ 1bar.
Noise is not a problem with my Buddy Club exhaust. Although, smog is a concern though. I would love the brapidy-brap-brap and high rpm's but streetability is a must. I gotta have the zoom-zoom smile from a crotch rocket thrill ride as apposed to a bucking bronco can't tame my horse headache. I currently have A-Spec's 500R @ 1bar.
11-03-2006, 11:15 PM
#58
Junior Member
Join Date: Oct 2006
Posts: 16
Originally Posted by METALGEAR' post='843729' date='Nov 2 2006, 05:43 PM
Judge Ito's Big Streetport works !!!! I'm proof of that !!!!
603 WHP @ 27 PSI
How many miles have you put on your engine since you ported it with his templet, and what kind of apex and side seals are you running.
11-04-2006, 01:49 AM
#59
Senior Member
Join Date: Dec 2002
Location: Belleville, IL
Posts: 110
Originally Posted by 13bdatsun510' post='843815' date='Nov 3 2006, 09:15 PM
How many miles have you put on your engine since you ported it with his templet, and what kind of apex and side seals are you running.
Not sure about the miles, it was built 1.5 years ago. Stock 2mm seals and springs. The motor has taken 100 + runs on the dyno, lots of outings to the 1/4 mile track and plenty of street driving.
11-05-2006, 04:57 AM
#60
Senior Member
Thread Starter
Join Date: Jan 2002
Location: NJ USA
Posts: 1,915
Originally Posted by METALGEAR' post='843838' date='Nov 4 2006, 07:49 AM
Not sure about the miles, it was built 1.5 years ago. Stock 2mm seals and springs. The motor has taken 100 + runs on the dyno, lots of outings to the 1/4 mile track and plenty of street driving.