Rotary Newbies
Thread Starter
Junior Member
Joined: Jun 2003
Posts: 2
hi guys
where on the web would be the best place to read up on rotary motors ie tuning to porting . the reason i ask is beacuse i have just finished putting a 13b turbo into a 1978 mazda 323 rwd all the crap was really hard to do plenty had to be modified and changed to fit but now that is finished and i need to start with the fine tuning it what needs to be changed to get bigger HP any idea's please mail me
where on the web would be the best place to read up on rotary motors ie tuning to porting . the reason i ask is beacuse i have just finished putting a 13b turbo into a 1978 mazda 323 rwd all the crap was really hard to do plenty had to be modified and changed to fit but now that is finished and i need to start with the fine tuning it what needs to be changed to get bigger HP any idea's please mail me
Senior Member
Joined: Sep 2002
Posts: 5,542
From: Vanderhoof,BC(Canada)
Do a search around this site.The info here is "A" quality. If you some good power gains on a turbo you should put a high flow downpipe and 3" exhaust on it if its possible.Plus change to a high flow filter.
Senior Member
Joined: Dec 2002
Posts: 408
From: Ft Lauderdale, FL
Originally Posted by rotor head sa' date='Jun 21 2003, 07:56 AM
hi guys
where on the web would be the best place to read up on rotary motors ie tuning to porting . the reason i ask is beacuse i have just finished putting a 13b turbo into a 1978 mazda 323 rwd all the crap was really hard to do plenty had to be modified and changed to fit but now that is finished and i need to start with the fine tuning it what needs to be changed to get bigger HP any idea's please mail me
where on the web would be the best place to read up on rotary motors ie tuning to porting . the reason i ask is beacuse i have just finished putting a 13b turbo into a 1978 mazda 323 rwd all the crap was really hard to do plenty had to be modified and changed to fit but now that is finished and i need to start with the fine tuning it what needs to be changed to get bigger HP any idea's please mail me
Basic mods are.....
1 fuel....(bigger pump, fpr(fuel pressure regulator), and injectors)
2 exhaust.....(dp(downpipe), highflo cat or no cat(depends on your state law)
3 intake.....tid(turbo inlet duct)
4 gauges......boost,egt,a/f,oil press,fuel press
This should get you started, as stated before just do a search and you will find a ton of info or just ask and you will get the answers. Welcome aboard and that sounds like a very nice project that you took on post up some pics of that thing.
Damian
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
