Can you use just a universal kit on an RX-7 or do you need a special kit? Who makes a good kit? What all would i need besides a kit? And how well would nitrous go on a carborated motor? Most of my knowledge comes from hondas and other piston motors. Any help and suggestions would be greatly appreciated.

 

if you are still looking for info on a setup check out rx7club.com and do a search on nitrous or pm this member....scathcart....(i hope i spelled it right) he did a good detailed write up on how to run a nos kit.

 

http://1300cc.com/howto/how2/NOS.htm

 

They have specific kits for the RX-7. I list one for the 2nd Gen and the 3rd Gen in the NOS book.

 

I wouldn't suggest it with more than a 50 shot of Nitrous!If your going to get a dry nitrous setup than don't even bother.

 

There is a nice write up with pics on fc3s.org also. It is a wet setup tapping into the fuel rail. Pretty nice.



Gotham Racing also puts them on. You can contact them I'm sure for info.

 

i heard large amounts are hard on the side seals (makes sense if you think about it, so don't get greedy

 

A Nitrous system is pretty standard. You want a wet setup and basically any wet setup will work.



My bro ran a Mustang kit in his 87GXL.



The kits you see for specific cars are usually for dry kits.



DO NOT BUY A DRY KIT.

 

Dont be cheep, get a wet shot, i wouldnt go over 75hp shot.

 

This contains everythign you'd need to know about N20 on a rotary.