If You're New And You Care To Share,
11-18-2005, 04:54 PM
#331
Junior Member
Join Date: Nov 2005
Posts: 17
Originally Posted by KingFD' post='779554' date='Nov 18 2005, 04:26 AM
^ Welcome and good luck with the FC. Keep us posted.
Since I managed to get everything needed to repair the her, pump included, I'll be taking the original pump out and hopefully we'll find something of value in the electrical design. Of course, for this one, it's just the position sensor that went out, so that could be a simple fix, however, with an accurate view of the circuit, we might be able to find another "cold solder joint" problem such as the switches, ecu, cpu, etcetera.
11-21-2005, 02:07 PM
#332
Junior Member
Join Date: Nov 2005
Posts: 1
Hey. Im new... just joined like 10 min ago =D. Im 17, I live in New York and i just bought a red 89 N/A near mint condition( its my first car ). I'm planning on a rebuild soon. I have a few other plans like adding a racing beat exh and a medium size streetport, but thats not until a little later. I don't know too much about fc's in general but ive been doing alot of research and i hope you guys can help me out just as i hope i can help you guys out. Thanks! 
11-24-2005, 09:39 AM
#333
Junior Member
Join Date: Nov 2005
Posts: 17
hi,
Im living in Canada right now and i am starting a rotary project in the coming year so i need as much knowledge as possible.
right now im driving two skyline gtr's but that will change to make room for a fd.
Im living in Canada right now and i am starting a rotary project in the coming year so i need as much knowledge as possible.
right now im driving two skyline gtr's but that will change to make room for a fd.
11-27-2005, 07:56 PM
#334
Junior Member
Join Date: Nov 2005
Posts: 1
Howdy. I'm new. Just picked up a stock '82. I had an '87 GXL a few years ago and I just love rotaries.
Anyway, my first issue is exhaust. Emissions is only a problem one day out of the year - the day I get tested - so I have been checking out catless systems. I am about to search messages, but if anyone reading this happens to have used racing beat headers and a bonez pipe, I would love to hear about the full configuration and your thoughts on it.
Anyway, my first issue is exhaust. Emissions is only a problem one day out of the year - the day I get tested - so I have been checking out catless systems. I am about to search messages, but if anyone reading this happens to have used racing beat headers and a bonez pipe, I would love to hear about the full configuration and your thoughts on it.
12-10-2005, 04:29 AM
#335
Junior Member
Join Date: Dec 2005
Posts: 1
Hi. For all practical purposes, I am Mike. 1993 FD3s with a single turbo conversion. A PFS Intercooler, and some other stuff, all mods were carried out by former owners, car did not live up to it's reputation (500 hp +, yeah right, tiny horses maybe...) but it looks like a nice project. Just bought a 13b RE, and me and my buddy are gathering info on how to proceed. Just wanted to say hi to all and I will be trying to post here as much as required. Seems like a pretty good bunch of "nopistonheads" and will open a new thread for the project, input is welcome. Project is shared with my cousin, who does not believe in internet forums, and I am out to prove him wrong because I know there are good guys out there...
Will go out and start a new thread somewhere else to tell you guys the story and see what you think. Hello all and nice to meet you.
The rocketman.
Greeting rockets
Will go out and start a new thread somewhere else to tell you guys the story and see what you think. Hello all and nice to meet you.
The rocketman.
Greeting rockets
12-13-2005, 08:11 PM
#336
Junior Member
Join Date: Nov 2005
Posts: 1
Hi everyone,
...just saying hello. I registered some time ago and have visited from time to time.
This site is very helpful and contains a very knowledgeable member base. Rotary engines intrigue me and I hope to own a rotary powered car in the future. I currently own a lightly modded 1st generation dsm.
Cheers!
Joey
...just saying hello. I registered some time ago and have visited from time to time.
This site is very helpful and contains a very knowledgeable member base. Rotary engines intrigue me and I hope to own a rotary powered car in the future. I currently own a lightly modded 1st generation dsm.
Cheers!
Joey
02-01-2006, 03:25 AM
#337
Junior Member
Join Date: Mar 2005
Posts: 9
I guess I can introduce myself here. I've been a member since mid-last-year but only realized tonight that I haven't posted anywhere that counts. Naturally there is a ton of info here and I have definitely appreciated it over the past several months! I'm in the middle of doing a ground-up restoration of a 94 FD that was stolen and stripped in NYC and since passed down through 3 other guys that didn't want to tackle the project until it hit me. I love it.
So, anyway. Yo, holla, hi, hola, and so forth to all that haven't talked to me on PM and vendor forums!
So, anyway. Yo, holla, hi, hola, and so forth to all that haven't talked to me on PM and vendor forums!
02-03-2006, 05:55 PM
#338
Senior Member
Join Date: Mar 2004
Location: Tacoma, WA
Posts: 179
Im back, been gone awhile, got ahold of Judge Ito and he told me to visit more often. Im south of Seattle in a town called puyallup. I drive my 8 once in a while (needs the Judge's touch) and we have alot of other toys too. anyway Hi
02-03-2006, 10:16 PM
#339
Senior Member
Join Date: Jul 2003
Location: olympia wa
Posts: 715
yeah, i've been back for a bit. i am glad that kathy followed. wouldn't be the same without her.
02-06-2006, 06:19 PM
#340
Junior Member
Join Date: Nov 2005
Location: syracuse, ny
Posts: 4
Hay everybody my name is melissa and I just got my first rx7. My boyfriend has an 86 guts and he let me drive it a few times last summer. I got one taste of the speed and had to have one of my own. I live in N.Y the car I have is and 87 base model, white with blue interior. I can't wait to get started working on it. I would like to meet some new people that could help me out with the car.