Yet another Odd Problem...
10-10-2002, 04:23 PM
#34
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
Originally Posted by twinturborx7pete' date='Oct 9 2002, 10:30 PM
i get an rpm signal, that would indicate the CAS is working no?
mike
10-10-2002, 04:32 PM
#35
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
damn it its an fd they all run.
its time to go back to the basics.
1. pull the plugs out, clean them and then crank the motor over with the throttle floored. you should be able to hear compression, and it should smoke from the plug holes
2. put the plugs back in, put a timing light on it. try to start it. does the light flash?
if yes: with the key on engine off, jump the fuel pump (its in the diagnistic box), you should be able to hear fuel running in the lines
if no: does the ignitor get 12v? how about the coils? try another ecu, see if you get any codes
mike
its time to go back to the basics.
1. pull the plugs out, clean them and then crank the motor over with the throttle floored. you should be able to hear compression, and it should smoke from the plug holes
2. put the plugs back in, put a timing light on it. try to start it. does the light flash?
if yes: with the key on engine off, jump the fuel pump (its in the diagnistic box), you should be able to hear fuel running in the lines
if no: does the ignitor get 12v? how about the coils? try another ecu, see if you get any codes
mike
10-10-2002, 10:35 PM
#36
Senior Member
Thread Starter
Join Date: Dec 2001
Location: Panama City Beach, Florida
Posts: 993
does 200-300rpm while trying to crank, tried the ignitor already,fuel pump is running, i get mist out the plug holes, um spark plugs look brand new still, exhaust smells like fuel, unflooded, no starty...
10-16-2002, 11:10 PM
#37
Senior Member
Thread Starter
Join Date: Dec 2001
Location: Panama City Beach, Florida
Posts: 993
Well i FINALLY got the car back on the street. you will never guess what it was. 
Well i changed the fuel filter and blew out the hardlines, still no fuel pressure.. pumps running and such.. the usual run around. We take the pump out.. well the O-Ring that goes from the pump to the Tube/hat had come out, and the pump was pumping the fuel, but when it would pump, some would dump back into the tank.. ie no fuel pressure. Reinstalled the o-ring and bent the bracket to make sure the fuel pump won't come lose again.. Btw i run a walbro fp...
My problems are solved. I'd like to thank everyone who helped me out! Remember... the 7 never dies.
Well i changed the fuel filter and blew out the hardlines, still no fuel pressure.. pumps running and such.. the usual run around. We take the pump out.. well the O-Ring that goes from the pump to the Tube/hat had come out, and the pump was pumping the fuel, but when it would pump, some would dump back into the tank.. ie no fuel pressure. Reinstalled the o-ring and bent the bracket to make sure the fuel pump won't come lose again.. Btw i run a walbro fp...
My problems are solved. I'd like to thank everyone who helped me out! Remember... the 7 never dies.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)