Vacume Line
#1
i have been told that my engin might not start because either the vacumeline has a leak or it has come lose and the full mixture is to lean (to mutch air to fule ratio) coult this be the cause or not and if it is whare is the vacume line
#2
It's probably the one closer to the left side of that one thing, under the UIM...closer to the firewall than the other one.
Really man you need to open your hood and inspect things there are around 72 vaccum lines in there. If I was to guess (and say it was a vac leak that was causing your car not to start), I would say look at the FPR solenoid and the FPR itself...because it regulates fuel pressure
Really man you need to open your hood and inspect things there are around 72 vaccum lines in there. If I was to guess (and say it was a vac leak that was causing your car not to start), I would say look at the FPR solenoid and the FPR itself...because it regulates fuel pressure
#3
Originally Posted by DUB' date='Feb 11 2004, 09:40 AM
Really man you need to open your hood and inspect things there are around 72 vaccum lines in there.
btw, the hood release is underneath the dash.. left of the steering column..
#4
Correction, the "hood" or rather, "bonnet" release is in fact to the RIGHT of the steering wheel. Jap car, RHD an all....
Yonner- is your vacuum line to the brake booster connected? This is a common one that gets left off.
Yonner- is your vacuum line to the brake booster connected? This is a common one that gets left off.
#5
lol its funny u saya bout the bonnet relese coz when ig ot the car it took me agesw to find it coz the cabel had came of the latch :P anyway send me some pics of the vacume liens or highlighet where they are on kines htis is realy pisiing me off i paid a grand for this engin just to run around in till i get ma big boy but ma car just blows white smoke
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)