Sinful7

Oh, and also, are you seeing a steady 10PSI on the primary turbo? Or does it bounce off 10PSI like mine does?

Rx7aholic

well according to the instruction, u need to have the set gain (start boost) boost to close to your regular boost level the set gain is the same as the start boost. Before I continued let me explain my expriment I did tonite, I removed the hose from the "NO" port and installed it in the "NC" port and I test it with lower boost setting's the car overboosted like crazy but I pass the 10 lbs mark, I also did not set all 3 level back to the start, start from 2% then raise it as boosted build up.

Anyway I put back the hose in the "NO" port and I had to adjust everything again, right now have the start boost set 14%, gain 14%,regular 14% and I hit close 11 lbs in 1st gear, above 4500 rpm I hit 8-9 , I am thinking that there is something I am missing or the unit does not work with 2nd turbo, which I think it's stupied why would greddy sell a unit that won't work proper. khris

Sinful7

Hmmm... I'm seeing the opposite.. low boost on the primary, and normal boost on the secondary. are you sure you plumbed it to the correct actuator? I can post a pic if you'd like..

Rx7aholic

please do, because this **** is driving me nutz.