3rd Generation Specific Talk about 3rd gen RX-7's here.

idle problem

Old Apr 16, 2007 | 12:05 AM
  #1  
fallinfast232's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2007
Posts: 5
Default

hey whats up just got my fd about 3 weeks ago love it but i have one problem when the car idles after moving it will drop to at 100 rpms then go back to normal idle it has died on me once or twice but only when i have to a/c going please help



- thanks Josh
Old Apr 16, 2007 | 07:59 PM
  #2  
Fd3BOOST's Avatar
Senior Member
 
Joined: Jun 2002
Posts: 9,725
From: La Plata, Maryland
Default

Originally Posted by fallinfast232' post='868316' date='Apr 15 2007, 09:05 PM

hey whats up just got my fd about 3 weeks ago love it but i have one problem when the car idles after moving it will drop to at 100 rpms then go back to normal idle it has died on me once or twice but only when i have to a/c going please help



- thanks Josh




What rpm are you calling "normal"? Sounds like a dash pot gone bad or needing adjustment though to me.
Old Apr 17, 2007 | 07:04 PM
  #3  
fallinfast232's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2007
Posts: 5
Default

normal around 800 i guess thats what is was idling at before i started having this problem



could you explain where and what a dash pot is???
Old Apr 17, 2007 | 07:46 PM
  #4  
Fd3BOOST's Avatar
Senior Member
 
Joined: Jun 2002
Posts: 9,725
From: La Plata, Maryland
Default

800 rpm is good.

The dash pot is on the front of the throttle body. It's a round plunger looking deal. It has a bolt oon the back with a rod that sticks out from that. That rod acts as a damper for the throttle release. It is there to keep the butterflies inside the throttle body from closing completely when you let off the gas. The air idle adujstment screw also helps with that but adujst the air idle screw will effect the rpm. The dash pot is only really in use right after you let off the throttle. You can loosen the nut on it and adujst it in more to see it it helps. So long as when throttle tab is released onto that white rod on the dash pot, the dash pot slowly retracts inward then it should be working.



I would tighted in the dash pot a few turns and test drive and see if you can work the stall out of the car. If nothing changes then the dash pot isn't your problem but it is certainly easy enough to check into that first.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dev
2nd Generation Specific
5
May 29, 2006 04:57 PM
Welsh Dan
3rd Generation Specific
3
Dec 17, 2005 11:45 AM
Booztd 3
3rd Generation Specific
1
Aug 1, 2005 07:16 PM
COsborne
2nd Generation Specific
4
Feb 25, 2002 08:46 PM
Turbo III
2nd Generation Specific
5
Dec 3, 2001 06:09 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:05 AM.