Can anyone give me a detailed how to guide to help me in removing the factory twins. Thanks

 

First soak you hands in water for about 5 hours, so they shrink enough to fit them were you need to. But seriously, just start unbolting everything you see above,below and around them.

 

a manual will help out

 

its not that hard, the turbos come off in one piece just unbolt them from the... wait, i think you ubolt them from the manifold, but maybe you just unbolt the manifold and it all comes off... it has been a while so i kinda forget, i just remember that you don't have to unbolt em from each other... also make sure you use some PB blaster or such, will help out tremendously



harrison

 

you unbolt them from the manifold i believe. dammit harrison i for got. anyways there are like 8 screws that you gotta remove. take off the down pipe and all the **** on top of them. that helps out alot. then it should be pretty obvious....darnit harrison and i just did this last november but i forgot.

 

steve cirian's website



try this. i think that there is a page for the full nonsequential how to, and the turbo removal is within...



lou