Rotarian 1126

I installed my Pettit Racing Aluminum AST the other day, and I was shocked when I removed my stock plastic AST. As I was taking off the factory hoses, the plastic inserts all crumbled like cheap junk in my hands. I didn't even apply any pressure or strength on them; I just loosened the clamps, pulled slightly and CRACK!! The lowest insert when it broke, sent a crack all the way up the seam of the tank! If any new FD owner is reading this, REPLACE YOUR AST!!! I'm glad I took the precaution, and listened to all the warnings that I had heard about. My first mod, and the best $150.00 I've ever spent!!

Fd3BOOST

You should have spent $10 on a brass nipple and a tap and you could of eliminated it all together.

Dumbrotorkid

THIS DOES HAPPEN!!! IT HAPPENED TO ME.AHHHHH

MazdaMike

have fun with ur vacuum hoses... they snap like crab legs

rfreeman27

yeap

Danno

I agree on the silicone hoses, when i replaced the the rubber i had to snap every single one and some barly had a seal so they most likely were not doing a thing.

c00lduke

It happened to me while i was just crusing along, I suggest to everyone to replace it also