GreyGT-C

i ran 850/1680 setup in my half bridgeport setup with NO idle issues. But i agree... stay small on the primaries... go big on the secondaries.

sen2two

so anyone wanna buy some 1000cc's...lol



alright...so where can i get some top fed 550's? i only found side fed ones.



and i dont really care what amount of boost im going to use. i just want around 500-600 WHP. if i get there using 15psi. great! but if i need around 25psi. than thats what i'll push.



and i am planning on going to pettit to get my car tuned. unless this tuner gabby comes from P.R. around the time i finish my car. he comes every now and again to tune rotarys around my area. i just have to get lucky. anyone know how much pettit charges for tuning? i wrote them with no reply. and i cant seem to get through when i call.

Fd3BOOST

Your not going to get 500-600rwhp on 15psi. Even with a big turbo your going to need to wick up the boost.

What turbo do you have? I assume you are going to add some meth or water injection?



All you had to do was search the web for 550 top feed injectors. Take your pick.



http://www.fuelinjectorclinic.com/cart/mitsubishi.htm



http://www.xcessivemotorsports.com/merchan...d=78&step=4



http://www.hksusa.com/products/?id=718



http://www.racetep.com/rc.html



etc. etc.

GreyGT-C

ummm.... why top feeds? Jusst throw in a set of stocker 550's in a stock primary rail.



agreed... you are not gonna see 500-600 at 15 psi... unless you have a 20B that you aren't telling us about.

Fd3BOOST

He already bought the KG parts primary rail. I agree though. You could sell it and pocket the loot by using the stock parts.

sen2two

im gonna stick with the KG rail. im just gonna get some smaller injectors.



and i know i will not hit 500-600 at 15psi. i was just giving an example.



and im undecided right now on wether ill be running alchohol/water injection. or keeping race gas in there. since i have my TII to drive everywhere else. maybe just 100 octane will be good enough. i dunno....not sure yet. i do like the idea of 25psi on pump gas though...

Fd3BOOST

Yea you know now that we told you but in your previous post you even said you didn't know.