I can't get the pin in the attached pic out. I can only get it about half way out. Then there is nothing else to tap on. I tried pulling in it with pliers.

Anybody got in pointers or ideas?

 

use another one to tap from the otherside if you dotn ahve one cut the sharp pont from a nail and use it to folow it through i had the same problem omg **** i aitn got any recent pcis of how my cars getign on up for u guys 2 c

 

I don't have another pin. I tried using a long screw and numerous other things to push it threw. I'll try a nail.

 

There is a lobe in the middle of the pin. Make sure that you don't try to force the pin through the worng way.

Tap it down with a hammer and then grab it with visegrips and tug.

I haven't seen one that wont come out.

 

Yea, Im tapping the right way. I just haven't found anything that will fit to push it completly threw. I'll go by some vicegrips tomorrow.

Thanks

 

cut it off with a dremel and buy a new one

 

No, that is not necessary. It pulls right out with visegrips.

 

The vicegrips worked. Now to get the new door on.

 

well doen man gd to see this forum is full fo ppl givin dg adivcce

 

Glad that helped.