doing non seq dont know where these vaccums go.
07-08-2008, 12:41 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2008
Location: daly city, ca USA
Posts: 2
I'm trying to do a non seq, i bought the block off plates from bonzai racing already. But i'm stumped on the location of these vacuum lines.
these two seem to be for the fpr? how come there are two? on the middle blue vacuum hose i connected one to a actuator and the other to a nipple thats facing the firewall on the LIM, but dont know is it correct.
[attachment=44613:IMAGE_115.jpg]
I dont know where these two go or what the top one is for.
[attachment=44614:IMAGE_117.jpg]
these two seem to be for the fpr? how come there are two? on the middle blue vacuum hose i connected one to a actuator and the other to a nipple thats facing the firewall on the LIM, but dont know is it correct.
[attachment=44613:IMAGE_115.jpg]
I dont know where these two go or what the top one is for.
[attachment=44614:IMAGE_117.jpg]
Thread
Thread Starter
Forum
Replies
Last Post
matts86fc3s
2nd Generation Specific
19
11-22-2005 11:23 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)