automatic to manual tranny swap
#1
I'm looking at FD's to buy all over the place the really nice one's I'm finding are automatic transmissions. How hard is it to swap from auto to man.?
P.S.- yes I've researched it on the forum and I didn't find anything on it. (although I'm not good with computers... lol.)
Thanks a bunch!
P.S.- yes I've researched it on the forum and I didn't find anything on it. (although I'm not good with computers... lol.)
Thanks a bunch!
#2
just save yourself the headache and buy a manual car if thats what you want.
to do the swap i believe you will need the following:
the tranny
clutch/flywheel
pedals
clutch master and all associated hard lines.
clutch slave
interior trim and the rubber boots, shifter, ****,
probably the driveshaft
not cheap. and you would want to make sure you dont get a 93 tranny with a going bad 5th syncro which theyre notorious for.......
to do the swap i believe you will need the following:
the tranny
clutch/flywheel
pedals
clutch master and all associated hard lines.
clutch slave
interior trim and the rubber boots, shifter, ****,
probably the driveshaft
not cheap. and you would want to make sure you dont get a 93 tranny with a going bad 5th syncro which theyre notorious for.......
#4
Originally Posted by Agent_Orange' post='876517' date='Jun 28 2007, 08:04 PM
I'm looking at FD's to buy all over the place the really nice one's I'm finding are automatic transmissions. How hard is it to swap from auto to man.?
P.S.- yes I've researched it on the forum and I didn't find anything on it. (although I'm not good with computers... lol.)
Thanks a bunch!
I just completed a successful swap the other day. EVerything is fine, runs great even with a used tranny. I spent about 3300 dollars for parts and labor, it's worth every penny, let me know if you have any questions.
#5
Rotary Villain thanks for the info 'bout the '93 Tranny's I didn't know that. I think I'll be researching the FD section for a while to make sure I know what I'm doing once I get the FD. As for the swap, I was just wanting to make sure that you didn't have to have any sensor's or little quarks before doing the swap.
Thanks again!!
Thanks again!!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)