4 Rib Belt For Greddy Pulley Kit.. Where To Buy?
04-29-2005, 08:36 AM
#11
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
05-02-2005, 06:19 PM
#14
Senior Member
Thread Starter
Join Date: Jan 2003
Location: union, new jersey
Posts: 8,079
its 31.5 inches with the alternator all the way up.. so its a streched belt. would 29.5 work? with the alternator all the way down? its about an inch and a half difference as far as the highest and lowest setting.
05-02-2005, 06:25 PM
#15
Senior Member
Join Date: Jul 2003
Posts: 1,850
[quote name='FikseRxSeven' date='May 2 2005, 07:19 PM']its 31.5 inches with the alternator all the way up.. so its a streched belt. would 29.5 work? with the alternator all the way down? its about an inch and a half difference as far as the highest and lowest setting.
[/quote]
31.5 - 29.5 = 2 inches
You'd be pushing it getting a 29.5 belt man. You cant find a 30.5 ? that would be the best bet it seems, maybe even a 30
[snapback]707308[/snapback]
[/quote]
31.5 - 29.5 = 2 inches
You'd be pushing it getting a 29.5 belt man. You cant find a 30.5 ? that would be the best bet it seems, maybe even a 30
05-02-2005, 09:43 PM
#16
Senior Member
Thread Starter
Join Date: Jan 2003
Location: union, new jersey
Posts: 8,079
well not necessarily joe...
i was thinking since the whole alternator assembly moves down it gives a smaller circumferance for the belt that might be greater than the adjustment screw from lowest to the highest position.
my concern is... since the alternator pulley is actually closer to the fulcrum than the adjustment screw. so a 1.5in adjustment on the screw could be .75in at the pulley.
im not saying you're wrong, cuz you're probably right, but there are other things to look at i guess
i was thinking since the whole alternator assembly moves down it gives a smaller circumferance for the belt that might be greater than the adjustment screw from lowest to the highest position.
my concern is... since the alternator pulley is actually closer to the fulcrum than the adjustment screw. so a 1.5in adjustment on the screw could be .75in at the pulley.
im not saying you're wrong, cuz you're probably right, but there are other things to look at i guess
05-04-2005, 08:19 AM
#18
Member
Join Date: Jul 2003
Location: Queens, NY
Posts: 49
how far are you from queens? we can just try it to see if it fits, i dont mind comin out. also, if you are looking for a 30 inch, autozone sells one in 4-rib size. thats what i used for my water pump pulley/no air pump setup but after stretching out after 100 miles or so i might scrap it and use a 29.5 inch since im at the top of the pulley adjuster already.
05-08-2005, 09:54 PM
#19
Senior Member
Join Date: Oct 2002
Location: Lincoln Park,NJ
Posts: 411
Since we are on the belt topic can anyone tell waht p/n I need for my setup, I got my air pump, and greedy alternator and water pump pulley, What size belt will I needed for that setup, I have been to pepboys inshort they stupied and R&S Strauss is even wrose, anyway which woulr be a better auto parts to go to get the belt that I needed? Also Martin did u check u out Rx7.com website they have that belt, I don't think it's 4 rib, I think it's a five rib but very short.