NoPistons -Mazda Rx7 & Rx8 Rotary Forum

NoPistons -Mazda Rx7 & Rx8 Rotary Forum (https://www.nopistons.com/)
-   3rd Generation Specific (https://www.nopistons.com/3rd-generation-specific-18/)
-   -   4 Rib Belt For Greddy Pulley Kit.. Where To Buy? (https://www.nopistons.com/3rd-generation-specific-18/4-rib-belt-greddy-pulley-kit-where-buy-47917/)

FikseRxSeven 04-27-2005 09:40 PM

anyone know where i can get them? my belt is kinda overstretched now

amp 04-27-2005 09:49 PM

if its with the stock crank..

local parts store should be able to size one up for ya...

as long as the belt is not cracked.. you can just adjust the play through the alt bracket...

Rx7aholic 04-27-2005 09:57 PM

Are u running the air pump? If u r running the air u need a belt size of aleast 54.5 inch long, if not then rx7.com has them, I just it from they thinking it's a replacement for the 54.5 inch belt but I was dead wrong, it look like it's only 20 inch long, shorter tha oem. khris

FikseRxSeven 04-27-2005 10:12 PM

[quote name='Rx7aholic' date='Apr 27 2005, 09:57 PM']Are u running the air pump? If u r running the air u need a belt size of aleast 54.5 inch long, if not then rx7.com has them, I just it from they thinking it's a replacement for the 54.5 inch belt but I was dead wrong, it look like it's only 20 inch long, shorter tha oem. khris

[snapback]705487[/snapback]

[/quote]





i dont have the air pump... its in your car remember?

GreyGT-C 04-27-2005 10:14 PM

use a piece of string to measure how long you need Martin... and just about any autoparts store should have it.

FikseRxSeven 04-27-2005 10:17 PM

[quote name='GreyGT-C' date='Apr 27 2005, 10:14 PM']use a piece of string to measure how long you need Martin... and just about any autoparts store should have it.

[snapback]705492[/snapback]

[/quote]



good thinking

treceb 04-27-2005 11:45 PM

i looked and looked. even went to the back of 2 stores to look for it and couldnt find it. they did have a 3 rib one. has worked fine since then.

Rob x-7 04-28-2005 05:49 AM

if you can take the belt there do that, they put it under a little bit of tension to measure them, just be sure to get one a bit shorter then what it measures out to be so you dont have another loose belt.



belt part numbers are easy to decode, lets say the particular brand of belt has a part number of 5430, 54 is the length, 30 is the width, so you can usually go from there. You should try a REAL parts store, not pepboys or autozone, they only know a part if it comes up in the computer. Or go to a repair shop if you know any, they have a wall of belts and more importantly a mechanic who knows how to find the right one.

FikseRxSeven 04-28-2005 10:44 PM

i was told, part# 5050325 and 5pk0825

jspecracer7 04-29-2005 05:45 AM

Yep, Shannon beat m to it. String = your buddy


All times are GMT -5. The time now is 10:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands