2nd Generation Specific 1986-1992 Discussion

Wtf! It Was Just A Launch!

Thread Tools
 
Search this Thread
 
Old 08-15-2005, 12:52 AM
  #1  
Member
Thread Starter
 
kaoliu's Avatar
 
Join Date: Aug 2004
Posts: 33
Thumbs up

had my S5 GTU for about a year and a half. So at a stop sign i decided to test out my car since i did the TB mod.. and right when i let the clutch... bam! the car studdered and the car now runs really gay and weak! it still starts up fine and idles fine... feels like the car is struggling when i rev it! I can still peel but the car feels like it has no power... do anyone of you know whats wrong with my car?
kaoliu is offline  
Old 08-15-2005, 11:58 AM
  #2  
Senior Member
 
sureshot's Avatar
 
Join Date: Feb 2004
Location: Orange Park FL
Posts: 363
Default

When the clutch first starts to wear out, it will start slipping in the higher gears before you notice it in first gear.
sureshot is offline  
Old 08-15-2005, 06:40 PM
  #3  
Member
Thread Starter
 
kaoliu's Avatar
 
Join Date: Aug 2004
Posts: 33
Default

THanks for your reply... but i know for sure it aint the clutch. I pulled the leading spark plug wire on the front rotor but the car didnt changed. After pulling the second leading wire the car studdered and died. So i'm guessing that its the front rotor thats messed....? anyone
kaoliu is offline  
Old 08-15-2005, 06:48 PM
  #4  
Member
 
Hell 'n' Back's Avatar
 
Join Date: Aug 2005
Location: Metro Detroit
Posts: 66
Default

I don't know for sure so im not going to say "yes" that is it



How many miles are on the engine?Did you do a compression test?
Hell 'n' Back is offline  
Old 08-15-2005, 07:42 PM
  #5  
Senior Member
 
fc3s4utnv's Avatar
 
Join Date: Jan 2005
Location: Greenwood AR
Posts: 831
Default

Or... does the car still have the cats?



If so mine did the same thing when the car finally clogged. Get it heat tested and be sure, my car was actually hard to get past 3k.
fc3s4utnv is offline  
Old 08-16-2005, 09:45 AM
  #6  
Super Moderator
 
1988RedT2's Avatar
 
Join Date: Apr 2002
Location: VA
Posts: 2,532
Default

One of the plugs might be carbon fouled. Pull all the plugs and clean or replace them. You might also have pulled a hose or wire loose when you launched. Just give everything a good going over.
1988RedT2 is offline  
Old 08-17-2005, 02:42 AM
  #7  
Member
Thread Starter
 
kaoliu's Avatar
 
Join Date: Aug 2004
Posts: 33
Default

hmmm.. i'll get to getting a compression test on it when i have some free time because i'm totally swamped with work and all. At the top of my head the car has at least 170xxxx miles on it. Gutted cats and newly replaced wires and plugs. But i'll check anyways... thanks guys for your help!
kaoliu is offline  
Old 08-17-2005, 11:46 AM
  #8  
Senior Member
 
sureshot's Avatar
 
Join Date: Feb 2004
Location: Orange Park FL
Posts: 363
Default

The "quickie" compression check.



Floor the throttle to cut fuel.

Crank the starter.

Listen carefully to the gear noise surges caused by the compression pulses.

They should all be exactly the same.



RrRrRrRrRrRr - all surges exactly even (normal)



RrRrRrrrRrrrR - uneven compression surges - 2 of each 6 are low (bad apex seal)



RrrrRrrrRrrrRrrr - alternating strong & weak gear noise surges (one rotor has lower compression than the other.)
sureshot is offline  
Old 08-17-2005, 03:28 PM
  #9  
Member
Thread Starter
 
kaoliu's Avatar
 
Join Date: Aug 2004
Posts: 33
Default

Great! Knowing this the front rotor sounds like this.... RrrRrrrRrrrRrrRrrrRrrrRrr... so... guess imma see if anyone wants to buy the car as is... anybody? hahahaha
kaoliu is offline  
Old 08-18-2005, 04:06 AM
  #10  
Senior Member
 
HeffSpooled's Avatar
 
Join Date: Feb 2003
Location: Rainy Seattle
Posts: 452
Default

Pull the big engine fuses.

Pull the leading plugs.

Put your finger over the (sparkplug) hole while your boyfriend cranks it over. You're looking for strong, even pulses.



Sure sounds like you knackered an apex seal or two.



Where in the USA are you kaoliu for peeps thinking of taking you up on your offer of a sale.



Cheers
HeffSpooled is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rotaryman88
Suspension, Wheels, Brakes, Tires
22
06-24-2003 02:15 PM
RX7CMS
1st Generation Specific
1
01-21-2003 12:47 AM
jackdhammer
Suspension, Wheels, Brakes, Tires
8
01-17-2003 01:15 PM
ALNY93R1
3rd Generation Specific
1
11-28-2002 01:09 PM
Phat Pat
2nd Generation Specific
11
09-01-2002 07:15 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Wtf! It Was Just A Launch!



All times are GMT -5. The time now is 04:04 PM.