Wont Start after turbo swap!
Thread Starter
Junior Member
Joined: Jun 2008
Posts: 3
Hey hows it going? So heres whats up, hopefully you can help. My Turbo was bad in my 13b 87 rx-7 so then i got another turbo and did the swap. the car ran fine even with the bad turbo. So after the new turbo was installed the car did not start anymore. I have no spark. I have changed the ignition coils and still nothing. the engine turns over fine it just wont start! any ideas?
Senior Member
Joined: Oct 2001
Posts: 790
From: Portland, OR
Originally Posted by betopalma_6291' post='901492' date='Jun 5 2008, 01:18 AM
Hey hows it going? So heres whats up, hopefully you can help. My Turbo was bad in my 13b 87 rx-7 so then i got another turbo and did the swap. the car ran fine even with the bad turbo. So after the new turbo was installed the car did not start anymore. I have no spark. I have changed the ignition coils and still nothing. the engine turns over fine it just wont start! any ideas?
Make sure your not flooded. A flooded car will appear to have no spark because the plugs get fouled.
Thread Starter
Junior Member
Joined: Jun 2008
Posts: 3
Originally Posted by fc3sboy1' post='901496' date='Jun 4 2008, 08:59 PM
grounds to the engine still in place, if not you may have a problem there, we just fried 4 injectors out ower race car due to hurry up and fire and forgot the grounds
all grounds on he engine are ssecure and correctly paced so thats not the problem.
Thread Starter
Junior Member
Joined: Jun 2008
Posts: 3
Originally Posted by dac' post='901497' date='Jun 4 2008, 10:25 PM
Make sure your not flooded. A flooded car will appear to have no spark because the plugs get fouled.
i dont think thats what it is because i get no spark at the coils i checked with a screw driver to see if it was giving spark to the plugs and nothing
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)