2nd Generation Specific 1986-1992 Discussion

Voltage Gauge...

Thread Tools
 
Search this Thread
 
Old 12-21-2002, 12:32 PM
  #1  
Senior Member
Thread Starter
 
CrashFactory's Avatar
 
Join Date: Dec 2002
Location: Cowgill , Missouri
Posts: 370
Default

When i am above 2k RPM it reads at or a little above 14, but as soon as i drop below 2k it goes down to 12....just put in a brand new battery...
CrashFactory is offline  
Old 12-21-2002, 12:42 PM
  #2  
Senior Member
 
Seppuku's Avatar
 
Join Date: Mar 2002
Location: Ky
Posts: 2,723
Default

With my car on the voltage reads 14 all the time. Only time i see 12 volts is on acc. It could just be your battery or guage? Im not sure but i know mine doesnt do that .
Seppuku is offline  
Old 12-21-2002, 12:54 PM
  #3  
Senior Member
 
j9fd3s's Avatar
 
Join Date: May 2002
Location: California
Posts: 22,465
Default

you should have the charging system looked at, it should stay over 12.5-13 all the time. look at your battery cables, the b+ wire one the alternator, and the alternator itself. mt car used to do that, the alternator and battery cables were both in poor condition



mike
j9fd3s is offline  
Old 12-22-2002, 01:14 AM
  #4  
Senior Member
 
FCmaniac's Avatar
 
Join Date: Aug 2002
Location: Eastern PA
Posts: 1,801
Default

Mine drops to just about 12.5 with the lights on. This didn't happen until I put on the alt. underdrive pulley. The lights dim at idle.
FCmaniac is offline  
Old 12-22-2002, 01:23 AM
  #5  
Senior Member
Thread Starter
 
CrashFactory's Avatar
 
Join Date: Dec 2002
Location: Cowgill , Missouri
Posts: 370
Default

that's another side effect, all lights dim under 2k too, i also have fog lights, lots of stereo crap and ricer style cobra eyes..i tested it on my way home and the thing that pulled the juice down the most was teh fog lights, after i turned them off and then on again, i didn't drop nearly as low as before...sounds really wierd, i am pretty good with electronics, but this I have no idea..
CrashFactory is offline  
Old 12-22-2002, 08:33 AM
  #6  
Senior Member
 
FCmaniac's Avatar
 
Join Date: Aug 2002
Location: Eastern PA
Posts: 1,801
Default

Maybe you're just overtaxing the stock charging system. How many watts are your amps RMS? How are the fog lights hooked up? You may want to consider a higher amp alternator. You also have to consider all the wiring and grounds aren't as good as new after 16 years...
FCmaniac is offline  
Old 12-22-2002, 12:49 PM
  #7  
Senior Member
 
1Revvin7's Avatar
 
Join Date: Oct 2001
Location: Peoria, AZ
Posts: 10,906
Default

Originally Posted by FCmaniac' date='Dec 22 2002, 02:14 AM
Mine drops to just about 12.5 with the lights on. This didn't happen until I put on the alt. underdrive pulley. The lights dim at idle.
Yeah me2, the i was like "DUH" underive pulleys... lol. I might take the main one off and sell it. Kindof stupid on the street.
1Revvin7 is offline  
Old 12-22-2002, 03:53 PM
  #8  
Senior Member
 
FCmaniac's Avatar
 
Join Date: Aug 2002
Location: Eastern PA
Posts: 1,801
Default

Originally Posted by 1Revvin7' date='Dec 22 2002, 01:49 PM
Yeah me2, the i was like "DUH" underive pulleys... lol. I might take the main one off and sell it. Kindof stupid on the street.
I don't have the E shaft pulley on yet but I dont drive that car much on the street and I'm going to switch to a manual steering rack and take out the A/C. Then I'll just have 2 alternator belts and nothing else. I'm trying to remove as much stuff as I can and still keep it somewhat street driveable.
FCmaniac is offline  
Old 12-22-2002, 08:09 PM
  #9  
Senior Member
Thread Starter
 
CrashFactory's Avatar
 
Join Date: Dec 2002
Location: Cowgill , Missouri
Posts: 370
Default

i have an 800watt (though ppl really don't like to believe it puts that out, hell don't think it'll push past 600) Pyramid Crystal COmpetion amp and i have no idea what it's RMS is but it's an old turtle shell RF 40ix....i checked all the wires on teh alternator and battery today, no problems or defects that i could see...i have everything (cept the amps) ran to the + and - posts of the battery, someone told me that was the best way to do it...i dunno, i know **** about DC......
CrashFactory is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1Revvin7
2nd Generation Specific
1
08-02-2003 04:42 AM
papasmurf
3rd Generation Specific
2
04-23-2003 02:05 PM
RussellTT94
3rd Generation Specific
3
08-22-2002 11:38 AM
Powerpack
2nd Generation Specific
7
04-19-2002 08:57 PM
ILUVMY88CABRIO
2nd Generation Specific
10
12-05-2001 11:37 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Voltage Gauge...



All times are GMT -5. The time now is 10:36 AM.