Need Some Advise On Service Cost!
i took my s4 to a shop today to get my tranny mounts, diff mounts at the back (big circular mounts) and the large block mount in the front of the diff replaced. i supplied all the parts for the job. i called them this afternoon to find out how much this work should cost and they said it's going to be about 900 something! does this sound accurate to you guys? i was shocked, that price sounds like its an all day job. please let me know what you think!
-Komisor
-Komisor
Do the work yourself if you can? I would never send a vehicle to a shop unless it is suspension, a tune up, alignments, etc.
Ask how long it took to do, and if it seems like bullshit, give the manager a peice of ya mind.
Ask how long it took to do, and if it seems like bullshit, give the manager a peice of ya mind.
thats not too terribly out of line if they are replacing all 3 diff mounts. To replace the 2 pressed in mounts means they have to actually pull the diff out, press the bushings out and press the new ones in. Thats a pretty big job actually.....
Tranny mounts should be about 2 - 3 "shop" hours.
Front diff mount should be about another 2 "shop" hours.
The rear / top diff mounts are a whole nother ball game, and I wouldn't be surprised if this job solely came out to around 4 - 5 "shop" hours or more.
So you're looking at about 10 "shop" hours times their shop rate...
$900+ doesn't surprise me.
-Ted
http://fc3spro.com/
Front diff mount should be about another 2 "shop" hours.
The rear / top diff mounts are a whole nother ball game, and I wouldn't be surprised if this job solely came out to around 4 - 5 "shop" hours or more.
So you're looking at about 10 "shop" hours times their shop rate...
$900+ doesn't surprise me.
-Ted
http://fc3spro.com/
thanks guys for the help, i ended up talking the garage down to about 500, which is alot better...i just really didn't want to get stuck half way through the job and realize that i don't have the right equipment!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



