Dramon_Killer

I have a haltech f9 with an HKS elbow and two 720cc injectors for sale.



Should give enough fuel for 350hp at least, much easier to tune than your s-afc and pretty much is gonna do the same thing.

Veritas

what's the haltech f9 do? My eventual goal is just about 350 hp. I planned on getting a standalone like the aem ems etc, but I haven't really put much thought into it yet as im still trying to get my **** organized. (place that's doing my porting, getting the new seal kit together, what type of turbo/exhaust I want) etc. I'm starting with fuel first since someone was kind enough to post up what type of front mount I should look into.



But what's the diff with going from the full ems to something like the f9? More tunability? Freedom to do whatever? Still don't know much about them, bump for the need of more info.



T.c.

Dramon_Killer

Oops, its an f5.



This bolts right up to a 13BT motor (Turbo II motor). It is a very easy to install and tune system. The previous owner put down 372 rwhp at 15 psi with this set up. This set up will provide sufficient amount of gas capable of 450 whp.



The Haltech F5 is a supplementary fuel injector computer designed to control the fuel delivery of an additional injector or injectors fitted to an engine’s fuel system as part of an after-market turbocharger or supercharger installation.



Without additional fuel delivery it is likely that the engine would ‘lean-out’ under higher boost pressures as a normally aspirated car’s fuel system is not designed to deliver additional fuel required once the engine is boosted.



The F5 System is totally independent of the standard fuel system. This makes it universal to most turbocharging or supercharging installations.



The F5 senses two engine parameters and actuates the supplementary injectors accordingly.



---

http://www.tweakit.net/shop/product_info.p...d64a49f37ccea81

---



PM me if you're interested.



I've got an HKS elbow and greddy