Injector Size?
01-04-2005, 12:24 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Hot Springs, Arkansas
Posts: 27
I'm currently doing a simple TO4 setup on my TII and I was wondering what fuel mods I'm going to need. I currently have a walbro fuel pump (255 lph) and a SAFC-II. I was going to buy a couple of 780cc injectors for the secondaries. Should I go with larger secondaries (like 1000cc) and use the 780cc injectors as the primaries?? Maybe 780s for both secondaries and primaries. I'm just unsure of what size injectors will be needed at the moment. I'm only going to run like 10-12psi of boost and I'm shooting for something like 280-300whp right now. It may be capable of more, I'm unsure. I'm going to go with a larger turbo later (like a GT42) and I can always upgrade the injectors later. Any help would be appreciated. Thanks.
01-04-2005, 02:38 PM
#3
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Hot Springs, Arkansas
Posts: 27
Well, I can get my hands on some 1600cc's for the secondaries. I thought that would be too much though. If I going to need that much, I have 2 extra injector flanges in my intercooler piping that are not currently being used. I could do something like 1600cc secondaries, 850cc primaries, and maybe stock 550cc's mounted in the intercooler piping, but I dont want to really fork up all the dough for an additional injector controller right now. The injectors are already going to kill me. But I'm lost as to what I need. Help!
01-04-2005, 02:46 PM
#5
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Hot Springs, Arkansas
Posts: 27
Originally Posted by j9fd3s' date='Jan 4 2005, 12:42 PM
1000cc secondaries should be fine. you may be able to do it on 780's though, but its gonna be tight
I'll try and track some 1000cc's down. Do you think I need to get larger primaries? Thanks for your help.
01-04-2005, 03:26 PM
#6
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
Originally Posted by Massive Retard' date='Jan 4 2005, 12:45 PM
I'll try and track some 1000cc's down. Do you think I need to get larger primaries? Thanks for your help.
you could do 680x4 but its gonna want to flood a lot
01-04-2005, 05:32 PM
#7
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Hot Springs, Arkansas
Posts: 27
I found some Precision 880cc injectors and I think I'm going to use those as the secondaries for now. Later I should be able to use those as the primaries when I get some more power. I'm just scared of leaning out. I've seen what happens when you run lean and are boosting. 
Thanks very much for your help!!!
