i need an aftermarket fuel pressure regulator
#2
Aermotive a1000-6 is the way to go. It can be used in both series( stock) or parallel setup. You need to purchase the -6 o ring fittings and o rings for it too. fc3s-pro.com has a good layout with pixs..
#3
I agree with 1Revin7. I have a Aeromotive a1000-6 And i love it.. But you can not run a after market Fuel pressure regulator with the stock S5 fuel rail.
I would get the stock S4 fuel rail and remove the fuel pressure regulator, Then tap the hole for Pipe thread, and screw in a fitting...
Or you can buy a after market fuel rail. If you do that you will most likely need after market fuel injectors and spacers also..
KGparts will have everything you need...
Keith was a big help to...
I would get the stock S4 fuel rail and remove the fuel pressure regulator, Then tap the hole for Pipe thread, and screw in a fitting...
Or you can buy a after market fuel rail. If you do that you will most likely need after market fuel injectors and spacers also..
KGparts will have everything you need...
Keith was a big help to...
Thread
Thread Starter
Forum
Replies
Last Post
1Revvin7
2nd Generation Specific
20
08-25-2002 11:46 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)