I hate how forgetful I am
#1
Okay so I am doing a complete TII swap for my car.
Here's a list of parts I need, I think I got all the parts I need for it listed, Let me know if I am missing anything:
TII Tranny, DriveShaft, Rear End,5Lug Conversion, (cause 5lug is hot) Don't need the CPU cause I am going Haltech Standalone. Uhm, I can't think of anything else? Help me out guys!!!
Here's a list of parts I need, I think I got all the parts I need for it listed, Let me know if I am missing anything:
TII Tranny, DriveShaft, Rear End,5Lug Conversion, (cause 5lug is hot) Don't need the CPU cause I am going Haltech Standalone. Uhm, I can't think of anything else? Help me out guys!!!
#5
If your using a standalone, you won't need to mess with the dash. Just keep all the interior stuff the same...
The biggest issue w/ the swap is the electronics really, so you should be fine w/ standalone.
And yea, swap to 5 lug, that makes my 4 lug turbo more rare :P
The biggest issue w/ the swap is the electronics really, so you should be fine w/ standalone.
And yea, swap to 5 lug, that makes my 4 lug turbo more rare :P
#6
Originally Posted by One320B' post='819708' date='May 17 2006, 10:48 AM
If your using a standalone, you won't need to mess with the dash. Just keep all the interior stuff the same...
The biggest issue w/ the swap is the electronics really, so you should be fine w/ standalone.
And yea, swap to 5 lug, that makes my 4 lug turbo more rare :P
LOL! In that case I'll stick with the 4 lug, but I'll go with a Brembo Big Brake package or something uber like a Williowood lightweight setup :P
#7
So does this seem to be a good shopping list to go out for?
TII Tranny
DriveShaft
Halfshafts
5lug setup Differntial
Haltech e6x with flying lead and MAP sensor (how big a map sensor?)
and FMIC.
Anything anyone wishes to add to this?
TII Tranny
DriveShaft
Halfshafts
5lug setup Differntial
Haltech e6x with flying lead and MAP sensor (how big a map sensor?)
and FMIC.
Anything anyone wishes to add to this?
#9
Lol, thats fine... i have my custom BBK .. porsche 6pot!
But yea, i'd start with the list you've got, then figure out what else you want to swap over, a lot of the NA stuff will "work" but for 100% just keep plugging in the T2 stuff..
But yea, i'd start with the list you've got, then figure out what else you want to swap over, a lot of the NA stuff will "work" but for 100% just keep plugging in the T2 stuff..
#10
That's what I planned on doing, I appreciate all the help guy's! I want to do this right the first time and have a schwack of issues rather then doing it wrong 4 times and still ending up in the same boat!
Starter New
Cruise I don't want
Clutch Slave Cylinder? Didn't realize there was a difference?
Starter New
Cruise I don't want
Clutch Slave Cylinder? Didn't realize there was a difference?