its an aluminum cd player holder with 3 52mm gauge spots underneath it.

 

where could i get one like that? and do they make one with a switch panel under it?

 

I don't know about that w/ the switchpanel.



The only real odd thing about these headunits, isn't the WIDTH. If you have a double- or triple-din headunit, it's being held in by this cage. The units screw to that, and that to the console.



My 86 GXL has a triple-din: Radio, Tape Deck, and EQ. All three are the same width, but when I went to change out head units...



I noticed the CAGE doesn't screw on to every aftermarker headunit. The holes that are set up for the stock headunit are in a different place then the holes on the aftermarket deck.







Dammimt, Beavis.

 

[quote name='TrboSpdAnt' date='Jun 21 2005, 12:52 PM']I noticed the CAGE doesn't screw on to every aftermarker headunit. The holes that are set up for the stock headunit are in a different place then the holes on the aftermarket deck.


[/quote]



my head unit screwed right to the triple din panel, im using the stock chassis with my setup and always have

 

The only thing I noticed is that there is not much extra depth for the wiring.

I needed most or the bottom bay for wiring space.