We sucessfully pulled the tranny out of UniqueTII's car and found the coolant leak. Yay for us! Things went pretty darned smoothly which of course means it's going to be hell getting it back together.
The throwout bearing didn't feel all that bad. this worries me a bit. How much play should there be in the fork for the clutch? *ponders a TII upgrade....* https://www.nopistons.com/forums/pub...#>/biggrin.png |
Where was the coolant leak?
|
Where was the leak?
The fork should rest on the ball thinggy with the spring to hold it in place. It shouldn't rattle but it should have good movement, is it bend or loose? C |
Originally Posted by 13BAce' date='Jun 23 2002, 03:09 AM
Where was the coolant leak?
Hose coming off of the rear rotor, the one that always breaks, is too small and is way to hard to replace if you don't have the intake off https://www.nopistons.com/forums/pub...IR#>/smile.png Pretty much what I had guessed. It was in reallll poor shape. |
Originally Posted by turborotor' date='Jun 23 2002, 06:11 AM
Where was the leak?
The folk should rest on the ball thinggy with the spring to hold it in place. It shouldn't rattle but it should have good movement, is it bend or loose? C Loose as all heck, I'll go out and look at it again here in a bit. And drool over his paint job. Now my wife wants me to paint my car that color... I want to make real sure we fix the problem before we put it all back together as it's not exactly something you want to do just for the heck of it. Alltho taking the upper intake off of a Turbo II is a lot easier then on an NA |
Originally Posted by Rotarydragon' date='Jun 23 2002, 09:23 AM
[quote name='turborotor' date='Jun 23 2002, 06:11 AM']Where was the leak?
The folk should rest on the ball thinggy with the spring to hold it in place. It shouldn't rattle but it should have good movement, is it bend or loose? C Loose as all heck, I'll go out and look at it again here in a bit. And drool over his paint job. Now my wife wants me to paint my car that color... I want to make real sure we fix the problem before we put it all back together as it's not exactly something you want to do just for the heck of it. Alltho taking the upper intake off of a Turbo II is a lot easier then on an NA[/quote] Make sure that the ball and spring are in good shape. |
Since youare there, might as well upgrade the clutch and cover https://www.nopistons.com/forums/pub...IR#>/smile.png
Make sure the ball is still attached the trans. SInce you are still there. check for any engine or trans oil leaks. C |
Originally Posted by Rotarydragon' date='Jun 23 2002, 06:23 AM
Alltho taking the upper intake off of a Turbo II is a lot easier then on an NA
|
Originally Posted by ILUVMY88CABRIO' date='Jun 23 2002, 10:32 AM
[quote name='Rotarydragon' date='Jun 23 2002, 06:23 AM']Alltho taking the upper intake off of a Turbo II is a lot easier then on an NA
I agree with that. I always found the NA easier to take apart quickly. |
It took me about an hour to take off my NA upper manifold, TB, and a/c bracket back when did my swap...but it was my first time taking an NA apart. I took my SE-X UIM and TB off yesterday in about 30min or so...no trouble at all...I guess it depends on what you work on more...I have a bunch of knowledge on NAs and how they work, but I have more Turbo experience...don't know how that worked out, lol....
|
All times are GMT -5. The time now is 06:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands