The Build Begins
#33
UPDATE. Got The fuel pump wired up had to extend a couple cables from the microtech harness. I am just going to a walbro 225lph for now to get the car moving. I also finished routing the 12V+ Switched to the coils and the microtech. Also started testing the functionality of the car since it has been close to 4 years since this car has had power. Hooked op the battery and the lights I had already tested so they checked out. One of the flip ups was not going up so i sprayed the inside of the motor relay with electrical connection cleaner and did the trick. here is a list.
Lights and flip up = OK
Tail Lights and turn signals = OK
Wipers = Only work on the I Setting tried it with 2 switches and did the same suspect motor.
Horn = the CPU Clicks but the horn does not sound. I provided the horns with a 12V + and they sounded
Dome Lights = OK
Hatch Light on Strut = OK
HVAC Controls = OK Yes I want A/C.
Lights and flip up = OK
Tail Lights and turn signals = OK
Wipers = Only work on the I Setting tried it with 2 switches and did the same suspect motor.
Horn = the CPU Clicks but the horn does not sound. I provided the horns with a 12V + and they sounded
Dome Lights = OK
Hatch Light on Strut = OK
HVAC Controls = OK Yes I want A/C.
#34
Little to no progress on my build had to spend $2600 on a transmission rebuild for my ford explorer. All wiring is done everything is functional just waiting on the $$$ for the motor. I can taste it already...............
Thread
Thread Starter
Forum
Replies
Last Post
iceblue
Rotary Engine Building, Porting & Swaps
26
05-24-2007 12:05 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)