alton316

Okay im going to do the ATF trick, what i need to know is how much

ATF do i put in each plug hole? from what i have read in other post,

it says to pour crank,pour cranck and so on, well how much do i pour

each time i pour?

dac

I don't think it takes too much.



When I did mine I saw my A/F meter go totally lean (probably the ATF on the O2 sensor).



I had to idle it for a good couple of minutes before I could give it any gas.



I don't know if I used too much, I only put 1 capfull of ATF in each hole. * 3 for each rotor. I used a funnel and a compression tester hose to pour it right in.



Around the block and it was all out.

87rx7TurboII

1 cap full is enough.....ive done it several times

alton316

Thanks, you said you done it several times.

Do you have to do it more than 1 time or do you mean on

several dif cars?

horn4858

then run some 2stroke oil in your gas too.

horn4858

lack of lube kills a 7 quickly.

horn4858

i used a 3oz squirt bottle to do cronic`s car.