Okay im going to do the ATF trick, what i need to know is how much
ATF do i put in each plug hole? from what i have read in other post, it says to pour crank,pour cranck and so on, well how much do i pour each time i pour? |
I don't think it takes too much.
When I did mine I saw my A/F meter go totally lean (probably the ATF on the O2 sensor). I had to idle it for a good couple of minutes before I could give it any gas. I don't know if I used too much, I only put 1 capfull of ATF in each hole. * 3 for each rotor. I used a funnel and a compression tester hose to pour it right in. Around the block and it was all out. |
1 cap full is enough.....ive done it several times
|
Thanks, you said you done it several times.
Do you have to do it more than 1 time or do you mean on several dif cars? |
then run some 2stroke oil in your gas too.
|
lack of lube kills a 7 quickly.
|
i used a 3oz squirt bottle to do cronic`s car. https://www.nopistons.com/forums/pub...IR#>/blink.png
|
All times are GMT -5. The time now is 04:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands