no, you can only use the LSD from the miata. That will fit in your front yoke. IT'll cost around $400-500 on ebay. Your axel stubs should fit. All you have to do is take your old one out, put in the new one, and set the backlash. Have a shop do it for you if you don't know how to do it. Don't go buying new stuff you don't need. Have lots of time to do this though, because it can be a bitch to get your rear end off the car. torsen web page install This link shows a guy that did what you'll want to do. It should work with your set up. 4 or 5 lugs shouldn't matter. Good Luck.

 

[quote name='DareBee' date='Jul 15 2005, 03:13 AM']Not sure what you are talking about Ted. All the FC diffs I have worked on don't have a REAR cover. The front nose comes off to get at the internals. You have to drop the whole rear end to be able to get at the internals. It is be far easier to swap in a working diff (you need to buy 1 for the parts anyway) than to try setting on old 1 up with new parts. New parts will cost 3X more than a whole diff anyway.


[/quote]

Nope, you're right.

Brain fart on my part...haven't worked on the rear diff in ages!





-Ted

http://fc3spro.com/