20b Into A Rx7 Series 1
#1
At the moment i have a 13B extended port in my series 1 Rx7, and i want to install a 20B.
I want to know if i get hold of an engine, will my 5 speed gearbox fit the 20B?
I also need to know ruffly wot the cost of a 20B is?
i already know that the engine mounts won't be in the same position as the 13B, but wot other modifications do i have to work on in the engine bay?
I want to know if i get hold of an engine, will my 5 speed gearbox fit the 20B?
I also need to know ruffly wot the cost of a 20B is?
i already know that the engine mounts won't be in the same position as the 13B, but wot other modifications do i have to work on in the engine bay?
#2
it will bolt right up to your tranny.
here in the us i see the motors going anywhere from 2000-4000
if you're not worried abotu the mount the rest of the stuff is easy, radiator hoses, intercooler pipes, you have to make a couple of oil lines.
mike
here in the us i see the motors going anywhere from 2000-4000
if you're not worried abotu the mount the rest of the stuff is easy, radiator hoses, intercooler pipes, you have to make a couple of oil lines.
mike
#3
This will help you out.
https://www.nopistons.com/forums/index.php?...10156&hl=J9FD3S
I was thinking of a 20B FB but I also want a house first tho.Then the insanity can begin. My T2 Fb will have to do with about 350whp when its done.
https://www.nopistons.com/forums/index.php?...10156&hl=J9FD3S
I was thinking of a 20B FB but I also want a house first tho.Then the insanity can begin. My T2 Fb will have to do with about 350whp when its done.
#4
Thanks for that.
is it easy to get hold of a 20B or is there only a serton amount around?
You see i am in Tassie so its going to cost me a bit more to get it here, and US dollars are a bit more then Australian dollars.
thanks 4 ya help
is it easy to get hold of a 20B or is there only a serton amount around?
You see i am in Tassie so its going to cost me a bit more to get it here, and US dollars are a bit more then Australian dollars.
thanks 4 ya help
#5
Originally Posted by rockin_rotor' date='Aug 26 2003, 10:24 PM
Thanks for that.
is it easy to get hold of a 20B or is there only a serton amount around?
You see i am in Tassie so its going to cost me a bit more to get it here, and US dollars are a bit more then Australian dollars.
thanks 4 ya help
is it easy to get hold of a 20B or is there only a serton amount around?
You see i am in Tassie so its going to cost me a bit more to get it here, and US dollars are a bit more then Australian dollars.
thanks 4 ya help
mike
Thread
Thread Starter
Forum
Replies
Last Post
MAZDAROTARYPOWER
2nd Generation Specific
17
12-08-2005 02:34 PM
rmphillip
2nd Generation Specific
5
05-11-2003 02:47 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)