20B FD
Thread Starter
Junior Member
Joined: Jul 2008
Posts: 4
Hey guys and girls. I have come across this forum a couple of times in the past whilst looking for a few rotary bits. Anyway thought i would post up my FD build and its twists and turns. Some ot you may have seen this but for those who haven't here you go:
As the car was shortlt after i bought it
Didn'ttake long for the new mods to start comming in:
Flatted for paint and being painted
All done
As the car was shortlt after i bought it
Didn'ttake long for the new mods to start comming in:
Flatted for paint and being painted
All done
Thread Starter
Junior Member
Joined: Jul 2008
Posts: 4
Now my inital plan was to build this as an N/A with 51mm Peripherals with fuel injected ITBS. So i set to work on the exhaust manifold and centre section:
Whilst building all of this i got offered a GT45 turbo at a decent price. WHO could turn that down. So it took a harsh turn in the turbo direction!!!!!
Fortuanatly the centre section is still useable so i set about building the rear section of the exhaust. Dual 2.5" centre exits (yes fuel cell will be in the boot).
Today i started the Turbo manifold. Not much just a quick pic off the phone. Kind of makes sense if you look at it.
So thats it up to date. I'll try and keep them comming as i go down the line. Still TONS to do !!!
Whilst building all of this i got offered a GT45 turbo at a decent price. WHO could turn that down. So it took a harsh turn in the turbo direction!!!!!
Fortuanatly the centre section is still useable so i set about building the rear section of the exhaust. Dual 2.5" centre exits (yes fuel cell will be in the boot).
Today i started the Turbo manifold. Not much just a quick pic off the phone. Kind of makes sense if you look at it.
So thats it up to date. I'll try and keep them comming as i go down the line. Still TONS to do !!!
Junior Member
Joined: Oct 2012
Posts: 21
Re: 20B FD
Shes also now running a Mircotech LT12-S.
Now with the acquirement of a spray booth the body needed updating as it was wasn't what i wanted :
I liked the white but it was abit tooooo white so i set about blaking some trim pieces and a nice painted detail down the middle.... old skool racer inspired:
Now with the acquirement of a spray booth the body needed updating as it was wasn't what i wanted :
I liked the white but it was abit tooooo white so i set about blaking some trim pieces and a nice painted detail down the middle.... old skool racer inspired:
