1st Generation Specific 1979-1985 Discussion

Oil Consumption Increasing

Thread Tools
 
Search this Thread
 
Old 09-14-2003, 01:02 PM
  #1  
Senior Member
Thread Starter
 
nod1stgen's Avatar
 
Join Date: Aug 2003
Location: panama city, florida
Posts: 249
Default

Yesterday was the end of 2500 miles since I got the 12a 6port running soundly. I started with about 21-23 MPG and slowly, over the last week, Thats climbed to 27-29 MPG, and thats with both windows down and the top off doing 70MPH most of the way. I drive it about 200 miles a day atleast five days a week. Lately Ive noticed oil consumption increasing to about 1-1.5 quarts per fill up. Also, I know the oil from the metering pump moves slow but shouldnt the lines be full? Mine dont really lookit....actually its hard to tell if there is any running through them at all.

BTW: since Im in florida I run 20W50.
nod1stgen is offline  
Old 09-14-2003, 05:22 PM
  #2  
Junior Member
 
SA22C's Avatar
 
Join Date: Jun 2003
Location: Saskatoon, Saskatchewan, Canada
Posts: 15
Default

You should only be putting a quart of oil every 1500 miles or so. 1 to 1 1/2 per tank is quite excessive. My car doesn't even lose that much with a leaky oil pan. As for the gas mileage, I regularly get 27 mpg on the highway @ 70 mph, so I'd say that you're doing good in that respect. Your OMP lines should look full all the time. I can see the oil moving in mine usually, and they seldom drain out except after sitting for a long while.
SA22C is offline  
Old 09-14-2003, 09:09 PM
  #3  
Senior Member
Thread Starter
 
nod1stgen's Avatar
 
Join Date: Aug 2003
Location: panama city, florida
Posts: 249
Default

Anyway to test the pump without taking it off? I need to make sure its working with all the miles I put on this car.
nod1stgen is offline  
Old 09-15-2003, 08:17 AM
  #4  
Senior Member
 
rexguy's Avatar
 
Join Date: Jun 2003
Location: Cedar Rapids, Iowa
Posts: 114
Default

My question is how the hell your getting 27-29 MPG, none of my FB's have done that LOL. But ya, you can disconnect the oiler lines from your OMP at the Carb. first you have to get the car warmed up then stop it disconnect the lines and measure how much you get after about 6 minutes. The engine should be at around 2000RPM while you do this. Now the VERY IMPORTANT PART! you have to squirt oil down the carb at about the same rate so as not to screw your motor. Hope this helps!
rexguy is offline  
Old 09-16-2003, 07:57 PM
  #5  
Senior Member
Thread Starter
 
nod1stgen's Avatar
 
Join Date: Aug 2003
Location: panama city, florida
Posts: 249
Default

Actually Im a bit puzzled about the Gas milage myself. the only thing I can come up with is it has somthing to do with having 6 ports instead of four combined with the smaller rotors of the 12a....I guess anyway. I never got more than 24 out of my other 12a's.
nod1stgen is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dguy
Rotary Engine Building, Porting & Swaps
1
08-13-2009 08:44 AM
daridari
RX-8 Discussion
3
08-24-2006 09:20 AM
IHEnter
Rotary Engine Building, Porting & Swaps
2
11-07-2003 01:03 PM
Mazdaroti
2nd Generation Specific
3
05-21-2003 11:18 PM
serpent12
2nd Generation Specific
12
04-02-2003 09:47 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Oil Consumption Increasing



All times are GMT -5. The time now is 10:43 PM.