Cooling System Fixes
#21
[quote name='btabacchi' date='May 16 2005, 11:22 AM']
quote=1revnrex,May 15 2005, 09:01 PM]
MMO is the milk of the Gods, I just wont use it in my oil cause it thins it down. I will run some thru before an oil change and I use a ton in the gas tank.
[/quote]
Please explain MMO to a rotary novice. We're autocrossing a newly acquired 1st gen with a pretty much stock 13B, and trying to learn what we can about about the engines. The MMO comments sound interesting.
Thanks
[attachment=30880:attachment]
[/quote]
I use it or 2 stroke as a back up incase the omp fails which it will probably never do. I use the MMO in the gas as a way to keep my fuel system clean and also keep carbon from building up in my engine. 2 stroke oil is thick enuff to where it coats the inside of the motor like it does a 2 stroke the way I understand it and Im sure it helps bump the compression a bit on an older motor. I know since I have been runnin oil in my gas I feel a little bit more pull than I do without but I dont have anything to prove that with but my butt dyno.
quote=1revnrex,May 15 2005, 09:01 PM]
MMO is the milk of the Gods, I just wont use it in my oil cause it thins it down. I will run some thru before an oil change and I use a ton in the gas tank.
[snapback]713320[/snapback]
[/quote]
Please explain MMO to a rotary novice. We're autocrossing a newly acquired 1st gen with a pretty much stock 13B, and trying to learn what we can about about the engines. The MMO comments sound interesting.
Thanks
[attachment=30880:attachment]
[snapback]713601[/snapback]
[/quote]
I use it or 2 stroke as a back up incase the omp fails which it will probably never do. I use the MMO in the gas as a way to keep my fuel system clean and also keep carbon from building up in my engine. 2 stroke oil is thick enuff to where it coats the inside of the motor like it does a 2 stroke the way I understand it and Im sure it helps bump the compression a bit on an older motor. I know since I have been runnin oil in my gas I feel a little bit more pull than I do without but I dont have anything to prove that with but my butt dyno.
#23
[quote name='nopistons94' date='May 16 2005, 10:43 PM']you run 2 stroke and MMO , do you do this at the same time? sounds like that would lower the octane to like 90
[/quote]
Or being the key word here
[snapback]713879[/snapback]
[/quote]
I use it (MMO) OR 2 stroke as a back up
Or being the key word here
#25
im setting up a huge sentra dual electric fan with a 2nd gen rad. I can fit a 2nd gen oil cooler in front of the electric fan too...its that big. Than actually setup a timer during shutdown to bring the engine temps down to elliminate heat soak. I'll have some pics up soon enough.
#26
[quote name='defprun' date='May 17 2005, 01:11 PM']im setting up a huge sentra dual electric fan with a 2nd gen rad. I can fit a 2nd gen oil cooler in front of the electric fan too...its that big. Than actually setup a timer during shutdown to bring the engine temps down to elliminate heat soak. I'll have some pics up soon enough.
[/quote]
Canadian *****, soo small.
Oops this isnt Gen D!!
What year Sentra did ya get the dual fan setup from and what moddin you have to do to it?
[snapback]714153[/snapback]
[/quote]
Canadian *****, soo small.
Oops this isnt Gen D!!
What year Sentra did ya get the dual fan setup from and what moddin you have to do to it?
Thread
Thread Starter
Forum
Replies
Last Post
sen2two
Rotary Engine Building, Porting & Swaps
9
02-20-2008 05:53 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)