Clutch Pedal
04-06-2009, 05:39 PM
#11
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
04-06-2009, 11:26 PM
#12
Member
Thread Starter
Join Date: Dec 2008
Location: Ellensburg, WA
Posts: 50
Originally Posted by j9fd3s' post='919965' date='Apr 6 2009, 03:39 PM
no steering stays in. theres a clip on the pin for the brake and clutch, its a weird double saftey thing, so once you figure it out its easy. its just hard cause its under the dash
yeah pressure plate is the spring, once its all in and bled, it'll be fine
yeah pressure plate is the spring, once its all in and bled, it'll be fine
04-08-2009, 11:21 AM
#13
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
Originally Posted by Maxtanner1' post='920016' date='Apr 6 2009, 09:26 PM
Hey thanks for all the help! I'm 18 and this is my first big car project it's interesting learning all this stuff... I checked out the clutch assembly and there's a connector above it for the "not-in-gear" neutral safety thing... Does that come straight from the starter? Will I need a new starter other than the automatic one or can I take the neutral switch wire from the automatic starter and send it to the clutch pedal and back?
they dont use the starter saftey thing on these cars, if there's a switch it would be for the cruise control. lol, careful not to mix up the brake light and cruise control plugs, as they are the same, did that once!
04-08-2009, 06:12 PM
#14
Member
Thread Starter
Join Date: Dec 2008
Location: Ellensburg, WA
Posts: 50
Originally Posted by j9fd3s' post='920088' date='Apr 8 2009, 09:21 AM
they dont use the starter saftey thing on these cars, if there's a switch it would be for the cruise control. lol, careful not to mix up the brake light and cruise control plugs, as they are the same, did that once!
04-10-2009, 01:30 AM
#16
Member
Thread Starter
Join Date: Dec 2008
Location: Ellensburg, WA
Posts: 50
Originally Posted by j9fd3s' post='920152' date='Apr 9 2009, 02:45 PM
just looked at mine, there ARE two up top
04-10-2009, 05:07 PM
#17
Senior Member
Join Date: May 2002
Location: California
Posts: 22,465
Originally Posted by Maxtanner1' post='920201' date='Apr 9 2009, 11:30 PM
yeah every bolt is undone and the brake booster is disconnected but there's that bolt underneath that the assembly can't get by, therefore it won't come off..
so it moves around? mine comes out, but its a race car so i dont have carpet, or anything else that might be in the way.
04-10-2009, 10:59 PM
#18
Member
Thread Starter
Join Date: Dec 2008
Location: Ellensburg, WA
Posts: 50
[quote post='920258' date='Apr 10 2009, 03:07 PM']
so it moves around? mine comes out, but its a race car so i dont have carpet, or anything else that might be in the way.
[/quote]
no it's the bolt underneath the brake booster ones. the plate won't slip past that one and it's being a pain to happer out of there. the outsides basically the same as the cover of the cluth master cylinder thing.
so it moves around? mine comes out, but its a race car so i dont have carpet, or anything else that might be in the way.
[/quote]
no it's the bolt underneath the brake booster ones. the plate won't slip past that one and it's being a pain to happer out of there. the outsides basically the same as the cover of the cluth master cylinder thing.
Thread
Thread Starter
Forum
Replies
Last Post
Arnetts7
RX-7 & RX-8 Parts For Sale & Wanted
4
01-28-2004 01:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)