1982' rx7 rear brake conversion.
Thread Starter
Junior Member
Joined: Aug 2008
Posts: 10
From: Ottawa Ontario Canada
I recently bought a 1982 rx7 and noticed it had drums in the back. I'm re-doing the breaks and I won't stand for weak drums. I have yet to take the wheel off and get a good look but before I do does anybody know where I can find a conversion kit? And better yet, some sort of guide. Thanks.
Senior Member
Joined: May 2002
Posts: 22,465
From: California
http://mrcmfg.com/catalog/product_info.php...products_id=269
i'd email them and make sure that works... i know they have it
i'd email them and make sure that works... i know they have it
Thread Starter
Junior Member
Joined: Aug 2008
Posts: 10
From: Ottawa Ontario Canada
I sent an e-mail this is what he replied:
Works for me, thanks for the help.
We have not installed them to figure the spacers need (if any) for these to work with a first gen.I do know the bolt size, flange and bolt spacing are the same so the parts will mount up. I just have not been able to get a hold of a drum rear end to check backspacing on the rotors. So..... Yes they will fit. You may need to make some spacers for the caliper mounting bolts to get it to line up with the rotor.
Senior Member
Joined: May 2002
Posts: 22,465
From: California
yep! a buddy of mine had a set of those brackets for his rx2 back in 97! its SOOOOOOOOOOO nice that respeed makes em.
the other thing ive seen is the rx7 strut to rx2/3 arm RCA, the one i saw was offset so it added caster too
the other thing ive seen is the rx7 strut to rx2/3 arm RCA, the one i saw was offset so it added caster too
Thread
Thread Starter
Forum
Replies
Last Post
mike_rudy
RX-7 & RX-8 Parts For Sale & Wanted
4
Apr 23, 2006 03:35 AM
kmaot
RX-7 & RX-8 Parts For Sale & Wanted
0
May 10, 2003 08:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
