|
I recently bought a 1982 rx7 and noticed it had drums in the back. I'm re-doing the breaks and I won't stand for weak drums. I have yet to take the wheel off and get a good look but before I do does anybody know where I can find a conversion kit? And better yet, some sort of guide. Thanks.
|
Theres know conversion kit that I know of. You have to get a disk rear end and swapp them out
|
re speed has a kit now, its basically a fancy caliper bracket, and uses the stock GSL rear discs and calipers
|
The only brake kits I saw at re-speed were here but they are all big brake kits, and only go from existing discs. Am I looking in the wrong place?
|
http://mrcmfg.com/catalog/product_info.php...products_id=269
i'd email them and make sure that works... i know they have it |
I sent an e-mail this is what he replied:
We have not installed them to figure the spacers need (if any) for these to work with a first gen.I do know the bolt size, flange and bolt spacing are the same so the parts will mount up. I just have not been able to get a hold of a drum rear end to check backspacing on the rotors. So..... Yes they will fit. You may need to make some spacers for the caliper mounting bolts to get it to line up with the rotor. |
yep! a buddy of mine had a set of those brackets for his rx2 back in 97! its SOOOOOOOOOOO nice that respeed makes em.
the other thing ive seen is the rx7 strut to rx2/3 arm RCA, the one i saw was offset so it added caster too |
| All times are GMT -5. The time now is 03:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands