Series 5 Hybrid
#1
Senior Member
Thread Starter
Join Date: Aug 2002
Location: One hour north of chicago (Mundelein to be exact)
Posts: 811
I'm looking to go with a series 5 hybrid turbo this summer. I found a guy selling them with a TO4B compressor with 60 trim. What kind of power do you typically see with such a setup? How much boost do these make?
Thanks
Thanks
#2
it kinda depends on what wheels you got in there, but my to4 super v did 265rwhp@9psi on the stock ecu and ported motor. i think with a stock exhaust wheel its gonna limit your power/rpms somewhat. on an unported motor the same turbo would do 11-13psi and hold that boost all the way to 7000+ (i was trying not to blow it up, so it didnt see crazy boost, or rev too hard)
#3
Do you know exactly what turbine it is? I have ran hybrids or hi flo turbines for a long time. Normally you will easily break 300hp. I dynoed 362 at the flywheel and that translated to about 318 at the wheels. This was at 1kilo or roughly 14psi. on a stock motor.
These compressors ususally wont make much power above 16psi. You will need some fuel upgrades to boost that high and get that kind of power. With Stock S5 injectors the maximum you can expect is 300hp and that would be like 265-270 at the wheels.
These compressors ususally wont make much power above 16psi. You will need some fuel upgrades to boost that high and get that kind of power. With Stock S5 injectors the maximum you can expect is 300hp and that would be like 265-270 at the wheels.
#5
Originally Posted by j9fd3s' date='Mar 9 2004, 10:41 AM
it kinda depends on what wheels you got in there, but my to4 super v did 265rwhp@9psi on the stock ecu and ported motor. i think with a stock exhaust wheel its gonna limit your power/rpms somewhat. on an unported motor the same turbo would do 11-13psi and hold that boost all the way to 7000+ (i was trying not to blow it up, so it didnt see crazy boost, or rev too hard)
Thread
Thread Starter
Forum
Replies
Last Post
MAZDAROTARYPOWER
2nd Generation Specific
17
12-08-2005 02:34 PM
SPD Racing FC
RX-7 & RX-8 Parts For Sale & Wanted
15
12-03-2003 07:49 PM
rmphillip
2nd Generation Specific
5
05-11-2003 02:47 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)