Originally Posted by barely street legal rotary12a' post='70910' date='Oct 9 2002, 11:30 PM
it's a blow through system the gas runs thru the turbo it a ray jay setup p3 turbo same thing as garret it's old school setup there was one at nopi runnin 10's but easy to blow up to and it goin to be hard to compress air into carb but it's a bad setup i got it for 800.00 sweet have done alot of work to it got a pic of it when i bought it look bad :rice:
I am surprised no one has said anything. What you described is a draw through set up. The carb pulls the air in and mixes it with fuel, then it goes into the turbo, compressed, and into the engine. Blow through is exactly that, it blows through. Air goes into the turbo, then through an intercooler, and then through a carburetor hat and into the carb. You will need to boost prep the carburetor, things like removing and sealing the choke, filling the floats or getting brass floats, etc. Blow through has better response and higher levels of achieveable HP, but draw through is much easier to make. Old school. |
apexi power fc GT35R, not sure what boost it'll be running
HKS cast manifold http://www.banzai-racing.com/2009_cu...p_manifold.jpg TIAL 50mm BOV http://www.banzai-racing.com/2009_cu...tall/mp_wg.jpg 850 primaries, 1600 secondaries and a walboro 255 pump http://www.banzai-racing.com/2009_cu...fuel_parts.jpg unknown make massive FMIC(right in front of radiator you can kinda see it in the pic prior to rebuild) http://www.banzai-racing.com/2009_cu...y_09-28-09.jpg tial 44mm wastegate http://www.banzai-racing.com/2009_cu...all/mp_bov.jpg finished product https://www.nopistons.com/forums/pub...#>/biggrin.gif just waiting on the trans to be done being rebuilt http://www.banzai-racing.com/2009_cu...mp_lg-blk5.jpg |
3 Attachment(s)
guess i never updated with the final in car shots :P
Attachment 17232 Attachment 17233 Attachment 17234 since these pics the abs pump and valves have been removed |
CX Racing turbo
t04b 60 trim 1.15 turbine front mount intercooler OBX waistgate (external) https://www.nopistons.com/forums/pub...1047683358.gif cheapo BOV (no clue on make) 9lbs |
Hi Everyone
I'm new to This forum it is great to join this Forum, hope i'm welcome in https://www.nopistons.com/forums/pub...DIR#>/wink.gif |
welcome to nopistons! normally people start out in the new members section, but since you're here, what do you have?
|
PFC
GT4088R Tial 44WG Greddy RS Custom manifold 1300cc Supra pump Custom Vmount more fuel and water injection to follow.... |
AEM EMS
GT3582R .82 a/r 28psi at 4700ft/ changed to gt4088 1.06 hotside megan racing manifold/ changed to doc race Tial 44 1680/550 changed to 1680/id1000 Bosch 044 changed to bosch 044 feeding a1000 spearco 26x18x3.5 stock coils/msd6a/msd wires with 10.5s (old setup) Top Gun Raceway Fallon,NV 4700ft 12.2@121 2.1 60ft |
Re: Post YOUR single turbo setup!
2 Attachment(s)
1994 fd
13b 3mm seals medium street port custom dual tial wastegate exhaust manifold borg warner s366 turbo id 1000/2200 injectors/ kg fuel rails/ 8 an fuel lines dual 340lhp aeromotive stealth pumps power fc ecu. Attachment 16129 Attachment 16130 |
Re: Post YOUR single turbo setup!
2 Attachment(s)
GT4202 w/ Tial 1.0 Rear
TS Inconel HeatShields( downpipe, turbine housing, turbo manifold) ID2000s x 4 currently( moving to 6 soon) Adaptronic E440D w/ innovative MTXL & Dual EGTs Half Bridge AEM smart coils 4" exhaust Currently @ 19psi, moving to 4 bar soon. |
All times are GMT -5. The time now is 06:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands