Single Turbo Discussion Area for discussing single turbo RX-7's.

I dont know Jack.

Old Sep 20, 2002 | 05:25 AM
  #11  
jspecracer7's Avatar
Senior Member
 
Joined: May 2002
Posts: 4,928
From: Okinawa, Japan
Default

Originally Posted by Dragon' date='Sep 20 2002, 08:21 PM
He you all need to make Van hook you up with a place to stay on base... He'll have to escort you every where you go and you'll have to put up with looking at his mug, but he can hook you up...
Yeah, but Ryan and Dave were so MONEY!...We had a blast in Rikkiville...You would've like it Chris!
Old Sep 20, 2002 | 08:44 AM
  #12  
gmonsen's Avatar
Senior Member
 
Joined: Jul 2002
Posts: 253
Default

fd3boost: if you go to japan and get a bunch of stuff cheapoer than here, that's one thing. i'm lost on all that air/army base hook up stuff. but, over here, while the comments above are good, you CAN do it cheap and set up a migration path from a basic setup to something more complex. example.



get a good small frame turbo of the rx6 or gt3540 or T04X type and manifold (~$2500). buy a good wastegate (~$450-500) then, upgrade your fuel pump to the best you can get (walbro, bosch, whatever @ ~$300). keep the stock pump, since it isn't worth anything used and run them in parallel. upgrade your secondaries by drilling (not recommended) or buying 1600's (~400). get the best rising rate fuel pressure regulator you can get ($300). i think you have a bigger IC and radiator already? (or, get them at ~$900 & ~$500). then, plug in a 4 wire o2 sensor (~$400-500) and hook up a wideband you borrow. using the rising rate fuel pressure regulator and relatively low boost, like 13-14 psi, you should be able to tune the air fuel ratio with the RRFPR adding fuel. it won't be as smooth as it would be with an aftermarket ems, but it will work fine. and, the cost will be very reasonable for the power you get, which should be in the 350-375 rwhp range. no bells and whistles, but efficient. -gordon
Old Sep 22, 2002 | 01:44 AM
  #13  
jspecracer7's Avatar
Senior Member
 
Joined: May 2002
Posts: 4,928
From: Okinawa, Japan
Default

I bought EVERYTHING needed to go single turbo for less than $4000.00 I'm talking EMS, 850 X 2 Primary, 1600 X2 Secondary, steel braided lines/an fittings, FP, FMIC, Radiator, Full Exhaust, Fittings, Clutch, Tires, PPF, Ignition, Turbo, manifold, wastegate...literally EVERYTHING. That's why Dave is saying "hook me up!"
Old Sep 26, 2002 | 12:44 AM
  #14  
Fastrotaries's Avatar
Senior Member
 
Joined: Aug 2002
Posts: 308
Default

if you ever want to know jack, let me know he lives across the street and is very informative
Old Sep 30, 2002 | 07:55 AM
  #15  
Fd3BOOST's Avatar
Thread Starter
Senior Member
 
Joined: Jun 2002
Posts: 9,725
From: La Plata, Maryland
Default

There is always one funny guy^^^



Yea the parts involed are minimal but the parts just cost so ******* much for what they are. I just need injectors/pump/regulator/manifold/watsegate/and turbo according to Gordo. I have the rest of the ****. I know I can get 340-350 rwhp out of the stock twins. Rikki ghas already done it. When my car goes back together I will have the same damn set up. Then it's just tunning.
Old Sep 30, 2002 | 08:26 AM
  #16  
RussellTT94's Avatar
Senior Member
 
Joined: Dec 2001
Posts: 1,053
From: Charlotte, NC
Default

Originally Posted by 94touring' date='Sep 17 2002, 06:20 AM
11. (optional) good rubber and driver skills to avoid the "first week wreck due to power"
hehe, didn't cheatham wreck his car when he was leaving KD?
Old Sep 30, 2002 | 04:29 PM
  #17  
vosko's Avatar
Super Moderator
 
Joined: Jul 2001
Posts: 17,839
From: NJ
Default

Originally Posted by RussellTT94' date='Sep 30 2002, 01:26 AM
[quote name='94touring' date='Sep 17 2002, 06:20 AM']11. (optional) good rubber and driver skills to avoid the "first week wreck due to power"
hehe, didn't cheatham wreck his car when he was leaving KD?[/quote]

yup
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ambassador_josh
Insert BS here
12
Feb 18, 2005 12:41 AM
89rx7turboII
2nd Generation Specific
15
Oct 21, 2003 06:47 PM
jakew131
3rd Generation Specific
5
Sep 20, 2003 07:41 PM
FDokinawa
Insert BS here
12
Jun 11, 2003 03:32 AM
SoRRoW
Insert BS here
4
May 19, 2002 09:01 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:35 AM.