Single Turbo Discussion Area for discussing single turbo RX-7's.

Full Seq Questions

Old 07-12-2005, 04:42 PM
  #1  
Junior Member
Thread Starter
 
Join Date: Nov 2002
Location: Netherlands, Europe
Posts: 17
Default

hi all,



busy with the full non-seq setup and wondering if the circeled items in the pic that i attached should go out?
Andreas is offline  
Old 07-12-2005, 04:44 PM
  #2  
Junior Member
Thread Starter
 
Join Date: Nov 2002
Location: Netherlands, Europe
Posts: 17
Default

furthermore, should the lower intake be removed or can it stay during the conversion?
Andreas is offline  
Old 07-13-2005, 12:37 PM
  #3  
Junior Member
Thread Starter
 
Join Date: Nov 2002
Location: Netherlands, Europe
Posts: 17
Default

[quote name='Andreas' date='Jul 12 2005, 10:44 PM']furthermore, should the lower intake be removed or can it stay during the conversion?

[snapback]737103[/snapback]

[/quote]

i read the posts about the conversion and i just wonder if the lower intake can stay or if i should take it off
Andreas is offline  
Old 07-14-2005, 03:49 AM
  #5  
Junior Member
Thread Starter
 
Join Date: Nov 2002
Location: Netherlands, Europe
Posts: 17
Default

[quote name='Ruthenian' date='Jul 13 2005, 09:36 PM']There is no need to remove the LIM.



What you remove when going non-seq depends if your car still has to pass emmissions testing.



If it has to pass, then you need to keep the air pump, ACV and it's solenoids.



If not, then remove them. You can remove the purge solenoid too.

Remove anything not required.

[snapback]737610[/snapback]

[/quote]

tnx Ruthenian for replying, i'll keep the airpump but will make a pipe from the airpump that connects to the pipe that runs from the engineblock to the cat. in that case i can put fresh air in the cat till 2800 rpm and pass emissions.



will take pix when the whole stuff is out, just weird "feeling" to take it out because there are soooo many solenoids that are under the uim. bit difficult to remove the frame with the solenoids because some screws are rotten (don't know how to describe it in English, i cant turn the screw anymore because i cant get any grip on them to turn them loose (thread for the screwdriver is gone)) oh well, i'll get it out soon ...



one more question: at the underside and in the middle of the uim is a connector in the uim itself (blue). connect that one or use a resistor for that one?
Andreas is offline  
Old 07-14-2005, 05:00 AM
  #6  
Member
 
Join Date: May 2003
Posts: 33
Default

Hee andreas,



Het is geen probleem door de emissie tests heen te komen. Ik heb geen cat whatsoever. En ik kom er doorheen.



De schroeven kunnen er makkelijk uit, eerst even wat WD40 overheen spuiten en een nachtje laten staan.



Groet

Rogier
skim41 is offline  
Old 07-14-2005, 11:46 AM
  #7  
DUB
Senior Member
 
Join Date: Jun 2003
Posts: 568
Default

[quote name='Andreas' date='Jul 14 2005, 04:49 AM']



one more question: at the underside and in the middle of the uim is a connector in the uim itself (blue). connect that one or use a resistor for that one?

[snapback]737956[/snapback]

[/quote]



that is the intake air temp sensor...you need it.
DUB is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jeusdroid27
Group Buys
0
12-27-2014 03:08 AM
jeusdroid27
Group Buys
0
12-27-2014 03:07 AM
jeusdroid27
Group Buys
0
12-27-2014 02:59 AM
jeusdroid27
Group Buys
0
12-27-2014 02:58 AM
Jdot
3rd Generation Specific
3
05-31-2005 03:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: Full Seq Questions


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.