Trans Removal/clutch/flywheel Install
03-04-2004, 04:58 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2002
Location: Alexandria Va
Posts: 657
Well here a quick line up of tools and what to do when pulling/installing the flywheel.
10mm (sockets)
12mm
14mm
17mm
19mm
21mm
2 1/8" (Flywheel socket) (from sears or snapon)
10,12,14,17 wrenches
extensions of all sizes
clutch allignment tool (3rd gen Rx-7 works)
Lift, trans jack, a friend is good to.
o.k.
shifter
Unbolt main cat
2 under carrage braces
Support trans*** with jack
front PPF bolts
drive shaft
starter
slave cyl.
transmission bolts
She is out!
pressure plate bolts
flywheel nut
Put it back in reverse order!
Have fun
10mm (sockets)
12mm
14mm
17mm
19mm
21mm
2 1/8" (Flywheel socket) (from sears or snapon)
10,12,14,17 wrenches
extensions of all sizes
clutch allignment tool (3rd gen Rx-7 works)
Lift, trans jack, a friend is good to.
o.k.
shifter
Unbolt main cat
2 under carrage braces
Support trans*** with jack
front PPF bolts
drive shaft
starter
slave cyl.
transmission bolts
She is out!
pressure plate bolts
flywheel nut
Put it back in reverse order!
Have fun
03-04-2004, 07:08 PM
#2
Senior Member
Join Date: Jun 2002
Location: La Plata, Maryland
Posts: 9,725
Originally Posted by Dont_Be_A_Rikki' date='Mar 4 2004, 02:58 PM
Well here a quick line up of tools and what to do when pulling/installing the flywheel.
10mm (sockets)
12mm
14mm
17mm
19mm
21mm
2 1/8" (Flywheel socket) (from sears or snapon)
10,12,14,17 wrenches
extensions of all sizes
clutch allignment tool (3rd gen Rx-7 works)
Lift, trans jack, a friend is good to.
o.k.
shifter
Unbolt main cat
2 under carrage braces
Support trans*** with jack
front PPF bolts
drive shaft
starter
slave cyl.
transmission bolts
She is out!
pressure plate bolts
flywheel nut
Put it back in reverse order!
Have fun
10mm (sockets)
12mm
14mm
17mm
19mm
21mm
2 1/8" (Flywheel socket) (from sears or snapon)
10,12,14,17 wrenches
extensions of all sizes
clutch allignment tool (3rd gen Rx-7 works)
Lift, trans jack, a friend is good to.
o.k.
shifter
Unbolt main cat
2 under carrage braces
Support trans*** with jack
front PPF bolts
drive shaft
starter
slave cyl.
transmission bolts
She is out!
pressure plate bolts
flywheel nut
Put it back in reverse order!
Have fun
Does the Rx-8 have about 90billion 10mm nuts also?
03-05-2004, 08:52 AM
#5
Senior Member
Thread Starter
Join Date: Sep 2002
Location: Alexandria Va
Posts: 657
Originally Posted by Fd3BOOST' date='Mar 4 2004, 09:08 PM
Looks pretty much like the typical Mazda stuff.
Does the Rx-8 have about 90billion 10mm nuts also?
Does the Rx-8 have about 90billion 10mm nuts also?
03-06-2004, 11:59 PM
#7
Senior Member
Join Date: May 2003
Location: Alexandria, VA
Posts: 787
Originally Posted by Dont_Be_A_Rikki' date='Mar 4 2004, 04:58 PM
Well here a quick line up of tools and what to do when pulling/installing the flywheel.
10mm (sockets)
12mm
14mm
17mm
19mm
21mm
2 1/8" (Flywheel socket) (from sears or snapon)
10,12,14,17 wrenches
extensions of all sizes
clutch allignment tool (3rd gen Rx-7 works)
Lift, trans jack, a friend is good to.
o.k.
shifter
Unbolt main cat
2 under carrage braces
Support trans*** with jack
front PPF bolts
drive shaft
starter
slave cyl.
transmission bolts
She is out!
pressure plate bolts
flywheel nut
Put it back in reverse order!
Have fun
10mm (sockets)
12mm
14mm
17mm
19mm
21mm
2 1/8" (Flywheel socket) (from sears or snapon)
10,12,14,17 wrenches
extensions of all sizes
clutch allignment tool (3rd gen Rx-7 works)
Lift, trans jack, a friend is good to.
o.k.
shifter
Unbolt main cat
2 under carrage braces
Support trans*** with jack
front PPF bolts
drive shaft
starter
slave cyl.
transmission bolts
She is out!
pressure plate bolts
flywheel nut
Put it back in reverse order!
Have fun