Reduced Price - Cym Track Beast
07-01-2004, 03:24 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2001
Posts: 22
Reduced Price - CYM Track beast
I'm relisting my car at a lowered price after a potential buyer's wife got sick causing him to cancel...
1993 Mazda RX7 road track only car.
LOT of extras... I have invested over $52,000 in this car and have every receipt to prove it.
-NEW 8/02 CYM repaint from media-stripped shell
-NEW windshield
-Custom louvered lightened stock hood
-Mazdaspeed GTC nose with custom aluminum splitter and ductwork
-Mazdaspeed GTC rear wing with custom 3" taller struts
-SR Motorsports 2mm ported motor (less than 1000 miles since install)
-T-78 turbo
-Tial 46mm wastegate
-1300cc secondaries
-Customized upper intake manifold
-Rare ASP elbow
-ASP full width intercooler
-Pettit small crank pulley
-Greddy Alternator and water pump pulleys
-Shaved stock mirrors and side marker lights
-Side windows remove with a single pull pin for track use
-Custom hand built radiator and oil cooler ducts
-Formula car outside driver's mirror
-Longacre curved inside mirror
-Custom flat black aluminum dash
-Custom brake ducts from nose to custom brake backing plates
-Mazdaspeed radiator lowered 1.5"
-Original Trev Dagley full width intercooler and intake duct
-CWC dual oil coolers
-SR Motorsports Ultimate fuel pump
-Racing Beat oil temperature send block
-Nordskog digital oil temp gauge
-White face stock gauges
-SPA White face boost gauge
-SPA White face water temp gauge
-Fan mod switch
-PowerFC with Commander
-Blitz SSBC boost controller
-Blitz turbo timer
-PFS twin tube midpipe
-PFS single tip exhaust
-Krutilek Motor Brace
-Pettit solid diff mounts and rear control arms
-Cusco Strut Braces front and rear
-Tri-Point .25" wall adjustable front sway bar
-Advanced Design double adjustable racing shocks
-1000lbs front/700lbs rear springs
-18x108" Technomagnesio black wheels
-265/650x18 Dunlop slicks front and rear
-Custom track brakes including Porsche 993 Big Red Calipers in front and
Wilwood NDL calipers rear with custom WideFoot brackets for use with
1999 Mazda rotors.
-Valskis twin adjustable manual master
cylinders ...no ABS.
-Widefoot pedal adapter
-Sparco America Driver's seat
-Sparco/TRW 6 point driver harness
-Full custom roll cage
-Hawker battery behind passenger seat
-4:33 ring and pinion for correct reading speedo
-There may be more, but I cannot remember everything
This car is very well known in the RX7 track community and beautiful. It is VERY fast and handles perfectly. It is fully sorted and needs nothing to run faster than track cars costing 10 times the price. Please understand this car is for track use only. There are no headlights and it is not street legal plus the interior is stripped to save weight. I have lots of spare parts that will go with the car along with full set up notes.
$24,000 FIRM
Available NOW
picture....
http://www.bradbarber.com/BBnew2DD.jpg
I'm relisting my car at a lowered price after a potential buyer's wife got sick causing him to cancel...
1993 Mazda RX7 road track only car.
LOT of extras... I have invested over $52,000 in this car and have every receipt to prove it.
-NEW 8/02 CYM repaint from media-stripped shell
-NEW windshield
-Custom louvered lightened stock hood
-Mazdaspeed GTC nose with custom aluminum splitter and ductwork
-Mazdaspeed GTC rear wing with custom 3" taller struts
-SR Motorsports 2mm ported motor (less than 1000 miles since install)
-T-78 turbo
-Tial 46mm wastegate
-1300cc secondaries
-Customized upper intake manifold
-Rare ASP elbow
-ASP full width intercooler
-Pettit small crank pulley
-Greddy Alternator and water pump pulleys
-Shaved stock mirrors and side marker lights
-Side windows remove with a single pull pin for track use
-Custom hand built radiator and oil cooler ducts
-Formula car outside driver's mirror
-Longacre curved inside mirror
-Custom flat black aluminum dash
-Custom brake ducts from nose to custom brake backing plates
-Mazdaspeed radiator lowered 1.5"
-Original Trev Dagley full width intercooler and intake duct
-CWC dual oil coolers
-SR Motorsports Ultimate fuel pump
-Racing Beat oil temperature send block
-Nordskog digital oil temp gauge
-White face stock gauges
-SPA White face boost gauge
-SPA White face water temp gauge
-Fan mod switch
-PowerFC with Commander
-Blitz SSBC boost controller
-Blitz turbo timer
-PFS twin tube midpipe
-PFS single tip exhaust
-Krutilek Motor Brace
-Pettit solid diff mounts and rear control arms
-Cusco Strut Braces front and rear
-Tri-Point .25" wall adjustable front sway bar
-Advanced Design double adjustable racing shocks
-1000lbs front/700lbs rear springs
-18x108" Technomagnesio black wheels
-265/650x18 Dunlop slicks front and rear
-Custom track brakes including Porsche 993 Big Red Calipers in front and
Wilwood NDL calipers rear with custom WideFoot brackets for use with
1999 Mazda rotors.
-Valskis twin adjustable manual master
cylinders ...no ABS.
-Widefoot pedal adapter
-Sparco America Driver's seat
-Sparco/TRW 6 point driver harness
-Full custom roll cage
-Hawker battery behind passenger seat
-4:33 ring and pinion for correct reading speedo
-There may be more, but I cannot remember everything
This car is very well known in the RX7 track community and beautiful. It is VERY fast and handles perfectly. It is fully sorted and needs nothing to run faster than track cars costing 10 times the price. Please understand this car is for track use only. There are no headlights and it is not street legal plus the interior is stripped to save weight. I have lots of spare parts that will go with the car along with full set up notes.
$24,000 FIRM
Available NOW
picture....
http://www.bradbarber.com/BBnew2DD.jpg
Thread
Thread Starter
Forum
Replies
Last Post
bradrx7
RX-7 & RX-8 For Sale
18
11-23-2002 11:04 PM
bradrx7
3rd Generation Specific
1
10-21-2002 05:06 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)